Search results

no such German efficiency for mine unfortunately, the cord doesn't budge when I try and push it up.

Hey, one photo attached of the whole unit, let me know if there's any specific photos you'd like - thanks for the help!

Hello all, a quick query that I haven't found elsewhere (probably because it's so obvious). I've just had a ceiling/rise and fall pendant light installed but I wasn't at home at the time so I didn't know at what height it was done. Can someone please explain how I adjust the height of the cord...

will do Spark, thanks for the heads up. Would the Varilight 20w e27 energy saving bulb be ok do you think?

thanks for all the info guys, very very helpful all round. I'll try the 20w bulb, otherwise will look at changing the fitting. Thanks again, and happy new year to you all!

thanks for the info guys, very helpful. (the bulb is downward facing for the record) I also forgot to state that there is currently a dimmer switch - is this ok?

Hello all, seen similar posts elsewhere but not quite the same so thought I'd ask it. I've bought a ceiling pendant light which requires a max 60w e27 bulb. Unsurprisingly, this isn't bright enough. Can anyone suggest what the highest rated low energy bulb equivalent that I could use is (bearing...

Hello all, seems some other people have had similar problems but not quite the same. Boiler was working fine (it's just on hot water setting) and we had some building work done in and around the boiler room and now a problem, prob not a coincidence! When I switch the boiler on I can see it...

awesome, thanks for all the help.

oh, ok, gotcha. The *4 thing - looked it up in the manual and it said that resets the keypad (but doesn't actually say what that means). Apparently, I should also be in test mode when I replace the batteries.......which is a problem, because the master code to get into test mode and I don't have...

Thanks ipalarms, sounds like a sensible suggestion! When you say reset the keypad, do you just mean press * and then hold down 4 for a few seconds? What does this actually do? Do I also need to reset the clock every time or is it enough to just reset the keypad, check for trouble and then...

Hello all. I’ve got a British Gas alarm system with a DSC keypad (PK5500 model). The trouble light has recently come on, and it says Device Low Battery. I take this to mean 1 or more wireless sensors have low battery, rather than the main 12V 7ah rechargeable battery. Is that right? It says...

ok, well I ran a snake down (I could only get hold of a 1.8m, pretty thin one from Wickes) and it went through comfortably so the blockage must be further on where I can't get to it. I'll have to get someone out. Thanks for all the help though, much appreciated.

can't follow the flexi pipe but seems to disappear under the dishwasher so I suspect it's from there, yes.

w/m as in washing machine? There's no washing machine in the kitchen, only the dishwasher. You mean the black pipe you can just see coming out of the floor?

Think the snake might be the way forward. The flexible pipe is clear, so the blockage is further on. As you can see from the picture, I can't really access it. Presumably pouring the cleaner directly into the pipe at the bottom won't work, and the snake is by far the better option?

I can try but I can only get as far as the flexible waste pipe as the pipework then disappears out of range. I'll try that and see what happens.