Search results

That's what I thought. Thanks

Anyone?

Hi all, Just a quick one. Does anybody know of any booster pump on the market which doesn't require dedicated hot and cold feeds. I am working in a flat which has communal hot and cold gravity supplies and the client wants to improve the pressure. However, there is no way of getting...

So you're just going to drain your heating system and leave your radiators turned off forever?

If you're changing the rads anyway then why are you asking?

Are you trying to freeze it while the system is still running?

Thanks for the support

Lowlife scum breaking into your site and stealing £1200 worth of your tools (Happened to me this morning, still in a seriously bad mood about it)

Hi Guys, I need to find a back to wall toilet pan with the following criteria: Height 430mm Floor to centre of waste outlet 230mm Floor to centre of flushpipe 380mm The flushpipe height is not critical as I can adjust it in the...

Doesn't an accumulator just improve the flow rate when multiple outlets are open, not the pressure?

There is nowhere to site a break tank so pumping from storage tank into Megaflo isnt an option

Morning Guys, A builder I work for has put me on to someone who has recently had their house refurbished, new plumbing etc. The plumber fitted a Megaflo without checking the incoming mains pressure (just over 1 bar) and subsequently there is not sufficient pressure to outlets. The customer...

Trying to zone off a gravity central heating heating system into 3 zones is quite an involved job. Even for someone experienced. If I were you I would get in a pro to do it or find some another way to keep your pond warm. Even if the electric pond warmer you mention is expensive to run, it...

Hi Just looking for a bit of advice. I have a Volkswagen Transporter van and today whilst driving home I had a lot of white smoke coming from my exhaust. I pulled over and called the AA. After a lot of investigation the guy informs me that my turbo is not working and that I may need a new...

The downpipe is timesaver, made of metal. See link...

You may be able to get a company to come and freeze it with nitrogen. But even then you will still have to cut the pipe and find a fitting to repair it with once you have removed the damaged section.

Hi Chaps, I need to cut out a 64mm hole in a timesaver down pipe to fit a strap on boss. I have the boss etc I just need some advice on drilling out the hole. I have a bosch bi metal holesaw which I have previously used to cut holes in structural steel joists. See link below...

Thanks Guys, I'll take a look

Hello guys, I have been asked to fit a sink and drainer in a burger van to be used for washing up. However the gap I have to put it in is only 1000mm wide (which is fine) by 400 deep. I am having trouble trying to find anything on the internet. Does anybody have any ideas or know of any...

Thanks whitespirit, So do you pump the system full of water manually or fill it up first from a hose then pump up the last bit to increase the pressure?