Search results

We had a BG 330+ boiler fitted almost a year ago with BG Homecare 200 free for 1 year. Just had the renewal in for next year but they don't seem to take into account that there should still be a warranty on the boiler. Does anyone know how long the warranty is on a British Gas 330+ boiler is?

Just for completeness thought I would show a finished bench, I did chop an inch off the ends, thanks joe-90 and imamartian.

Have now dismantled the benches and notice that the wood isn't too bad, it is some type of hard wood, only problem I have had with it in the past is that after jet washing it to remove the crap on it, you get very short fine splinters until it matures again then okay. Got prices for new wood...

These photos show how slats are attached, you can see that the inserts have come out of the slats......

Ah, right now I see what you mean, your slats must be fitted differently to mine. My slats are fitted on the ends, to holes in the side of the castings, they used wood inserts originally with round head screws screwed through the casting into the wood inserts. So if I used coach bolts the...

Thanks for the replies, looks like I will have to check out Jewsons etc for some wood slats and coach bolts perhaps, not sure if I can countersink them enough though. Not sure about the pallets foxhole, most ones I have seen are a bit rough. Thanks anyway.

I have three 12 slat garden benches with cast iron ends. The slats are hardwood but the screw anchors have come out of end of slats due to age, I am thinking of renewing all of the slats so it raises two questions really, do I renew with hardwood or a treated softwood which would require...

Thanks for that, so should be able to do a straight swap, still puzzled why it has packed up.. :? And now on top of that one of the inline isolator valves is leaking from around the screw that you turn 90 degrees, any way to stop it other than replace it?

I still cannot understand why my Hot water circulating pump has packed up after draining and refilling the system.. If air had been trapped in the pump would this have messed it up, Have tried running it and sometimes it runs and sometimes nothing, has it got some sort of cut out, but it...

Thanks Boilerman2, I notice the Grundfos has the connection box on the side, I need a pump with the connection to the top or bottom as no room to fit between pipework. I notice that the Wilo SB5 allows you to fit connection box in all 4 positions? Whats the reason for not fitting a...

Does anyone know where I can get a replacement for this pump, it needs to be the exact same pump as space is very limited, cant be any wider. The only information I can see written on the pump is SB5, RPM 2850, W - 67 and Class F.... The pump is used to circulate my domestic hot water...

Thanks for the replies guys, you maybe right Regencyroofingipswich might well see what a local roofer can do for me.

Yea, I know it should be done that way, but will have trouble matching old tiles and also as the pipe is half on the tiles and half on the lead flashing as it is a half pitched flat roof and they cut a vee in the flashing to fit pipe so would leave an unsightly vee gap in the flashing along edge...