Search results

If you put your hand in and feel if it comes down from the inner skin, you're ok. You'd need to drill out the perps nearest to its ends. The problem would be, that that is where it would fold to create its end stop.

ive got a cheapy version of a Barbour. Even that has lasted years because of the material.

Just the extension Madrab. And when all is finished, I intend to take off the iso valves and solder the system as it was. I've read that it's a big risk to leave them on and just carry on from there.

Cheers Terry.

Hi. I will be demolishing an old extension next week, in which there are three rads. I would like to cap the flow and return at house wall level, so that when i replace with new extension, i can create a copy of the missing system. Can i just cap off the 22mm pipes, or is there a need to keep...

Perfect Boys. Thanks for the replies.

Hi. Can anyone tell me if there is a recommended size of concrete lintels, for bridging over where my waste drainage passes through the courses below ground level. I will be adding 150 to each end, and the opening will only be 110mm plus the 50mm all round for movement. ( plus maybe a little to...

Apart from the cob bit, ( should read, Barm, Woody is spot on )

is this a project your are documenting and sharing?

Would like to know how to create the 5mm slot i seem to require, at the ridge for the airflow through my soon to be built roof. It will be Cembrit Jutland slates, sitting on 175mm insulation, between my 200mm rafters. Ventilation of 25mm needed, so i will counter batten. I can have grilles in my...

A really good job that Giblets. Cheers for sharing.

Need far more detail mate. Material, type of roof, what will be going on inside. Best bet to start off would be a trawl of the internet, and get a photo of the nearest thing you want.

No. Personally, my gripe is with any of the leeches getting one.

haha, typical socialist. What you could have said, is, "well done to the elected Government for not trying to gain any political advantage" instead, you try to slant it with, they've done some things wrong themselves so they better not say anything. When the opposition ( very loose term ) has...

also, a couple of air bricks on 2 separate walls would help.

Arrogant, opinionated and argumentative. Probably like this off social media too. Happy New Year to all who help contribute to this great source of information site, and ensure that we can all save some time and money, whilst doing the requested task as it should be done.

sounds like you've already decided. Hope you dont have nosey neighbours, or ones you dont trust.

If you're careful you could drill new holes in the cistern, or just one in the centre. Bit of silicon or other grabbing agent ( if you want to ), and you're done.

If you were using this in a newly constructed bathroom extension, could you just fix mechanically to the blockwork. I dont really trust dot n dab. If so, what fixings?

wrong page mate. this is to showcase your projects, step by step to help others. Go to the plumbing and central heating forum. has people responding every hour, minimum.