Search results

Thanks for your input.

I understand, thanks. Seems like a minor thing though and I'm happy the system will work fine as is.

It's 6 core just didn't connect it at the panel, there was a link in place between bell temper and 0v so left it as is.

It's not connected currently just wanted to confirm the impact

Hi, Probably a stupid question, but can can someone confirm that the bellbox temper return (C (TAMP) Texecomm Odyssey) is solely to advise the panel of the tamper circuit (lid) being opened/closed ? Without this connected to the panel the bellbox alarm would still sound if the bellbox cover...

OK, I will try this thanks. First call is to try and get rid of all the air I can hear swooshing around. From what I understand with a vented system like this an Automatic Air Valve shouldn't really be needed, even in place of the existing manual one you can see in the picture at the top...

The other pipework you can see is for a power shower and can be ignored, there is just one header tank and a normal hot water tank.

Yes that's the balancing valve, I have it fully open.

Waking up this thread, thanks to all the previous help which partially sorted the issue but in the end I moved my tank thermostat down to 55C so the boiler and pump eventually stop. Can I ask, I find whenever the system has been drained and then refilled it seems to get completely full of air...

Scratch the above, I guess it will always self activate if cover removed unless the special override is used.

Just a quick question. After installation the only thing I didn't test was removing the external bell cover tripping the microswitch to see if it activated the bell, I presumed it would. But, would the bell activate like this on its own OR would it need to be told to by the control panel...

Yes it was an internal sounder on the other red and black connections. Swapped with the new bell box no problem, thanks all.

Great, thanks for your help. I have a Texecom Premier Odyssey bellbox, so I guess I wire as follows: [code:1] CP8L Texecom Bell Bell Hold - D (0V) Bell - (trigger) B (Bell)...

Hi, I have a Eurosec CP8L alarm box with LCD keypad and wish to replace the very old large rusted alarm box with a big blue round strobe on the underside with a newer model with constantly blinking LEDs. I'm a bit confused by the wiring for the existing bell though, it has white and blue...

Thanks all, I will try the suggestions. Yes, the system is quite noisy so I suspect a lot of air may be trapped then. Do you bleed the pump when its running and the same question about the bleed valve on the cylinder HW feed ?