Search results

Hello All took a bath panel off the other day to try and change taps, got the cold water one off, which was nearer to me no probs. I then came to the far hot water one, i litterally had about 3inches to spare, i could not get my conventional spanner in to loosen the nut to get pipe...

Thanks Andrew

Can anybody elaborate slightly on "Insulation Breakdown" Its to do with fault finding on a radial/ring circuit??

If i get NICEIC registered, does that include me for part p registration? NICEIC website is a bit vague

Chocky blocks are good, they never let me down

I went to a job today to wire in 10mm shower cable to a CU..somebody already wired from shower down to CU.. As their was no free fuseways on old wylex rewirable, somebody wired the old 6mm cable into the two meter tails on CU...has anybody come across this before...?? I ended up fitting...

I had a job like that the other day, just turns out it was the obvious, a dodgy switch, new one in, problem sorted

on a shower run consisting of 10mm, does anybody regularly put 6mm from switch to shower, if less than say 2feet????

thanks for replies lads, after all that though she has decided to go with mains surface mounted spotlights..

cheers Delmel, I am looking for Decent ones, im based in Liverpool

Hello All, I am about to fit a UPVC ceiling, i have done one of these before which was quite successful, i glued it to the ceiling, its the type were the border goes around top of walls to support pvc. The ceiling i am about to undertake is a false ceiling, with the square...

Hello All gonna put in 8 downlighters in back kitchen, can anybody reccomend brands, watts, transformers, just anything to put me in right direction please...also will these be run off their own radial/ring?? etc

Actually i will edit that last point...i dont have the job, it was an initial enquiry from a potential customer...but thanks for putting me straight on that paul, im shocked and mortified you could think such a thing..

if he cant pull out the cut out fuse, how is he supposed to carry out the work??

thanks all, just dont think i will bother me arse turning up to do job, seems like a hassle

thanks andrew

Scenario: 3 overnight storage heaters 2 work, 1 does not Seperate consumer unit for 3 breakers meter comes on between 12 and 7, can anybody tell me is it possible to troubleshoot this problem without tampering with the meter, and without working between 12 and 7. Cheers

Do these generally come with 2 screw fixings or more? I would prefer 4, with at least 2 of them secured to a joist, what is the norm? Somebody wants me to take light down and fit a fan, but as usual with lights, they are barely hanging onto the plaster on its lasties. hope i dont have to...

run 10mm cable and put it on a 45 amp fuse

you got nothin better to do breezer than to post a useless load of sh*te, these forums are for constructive information. And since when did John feckin McEnroe shop at screwfix...mmm...mmm