Search results

There’s other kits on the market for the tape. Every type of board I have looked at you need to tape the joints and fixings with a water proof tape. Wedi seems to be the only one where it says you can use the sealant only,but it also says you can use the tape instead. They all seem to say use...

The joints https://www.tilefixdirect.com/product/MXWPS John..

https://www.tilefixdirect.com/product/OBSEALK For the tray John

Thanks... do I need to set anything on the alarm? Or just leave it unset then change the batteries? John

Cheers. I just need to know if I can change them now? John..

Hi, Can any one help? I have a Risco Lightsys alarm. I’m now getting text messages from it saying ‘low battery event lounge’ Can I swap the batteries myself? Or do I need to call out the company that fitted it? Thanks John...

No they dont cover the switch. I bought these https://www.ebay.co.uk/itm/263035929754 John..

Why would the finished edge be at the rear? What support would a strip of 18mm chipboard give? Not a lot. Especially after some would need cutting away to fit the hob. John..

If it was suppose to be left on it would not have a bare chipboard edge. John..

I think they are held in with dowels. Cut it in half and wiggle it out. John..

Take the cross member out, it's only there to transport the carcass John..

Aren't they guaranteed for 10 years from ukbifold? John...

Cut the panels down

The glass is in bi-fold doors, it looks as though the inbuilt blinds has created the straight down the centre of the glass. John..

That's what I thought. I got told to take pictures in no sunlight, 3m away at 90 degree angles to see if it passed the guide lines. To me it stands out like a sore thumb. I can see it from 12m away looking straight at it.

Hi, Before I take it any further with the supplier would this glass be acceptable to you. All the lines and patterns are inside the glass. There's a bright line down the centre, diagonal lines. And something that looks like a dragons head.. Cheers John..

That is a piece of 15mm aluminium bedded on the brickwork to bring the height up so the doors finished flush with the inside floor level

Thanks for the reply, The slab is a standard build hardcore, insulation etc, it's just my dodgy drawing. There was a 25mm strip all around the perimeter, I cut it down along the door edge as it was level with the finished floor and it is getting Amtico flooring fitted. The membrane level is...

What I have done is remove one course of bricks from the outer skin so the doors would be level with the inside floor. There was a strip of 25mm polystyrene all the way around the perimeter of the concrete slab, which I removed in front of the doorway ( needs self levelling) so I now have the...