Search results

Anyone help with a problem with my Bosch Maxx Silver Edition WFL 245S washing machine, it fills ok and empties ok but it wont wash or spin any ideas before i go out any buy a new one. I had a similar problem last year and replaced the brushes and its worked fine sine, I have checked them again...

you lost me at this one?? Thanks any way G

Cheers for that. yes 100% that wires went back into terminals, had this back from Honeywell: Unfortunately I cannot go by colours as anything could have been used. Terminal 1 should be a permanent Live and Terminal 3 should have a switch live wire in. (Monkey Nut Man, would it have been to...

And Yo monkey boy if you cant be constructive then keep shelling your peanuts. Comments and feedback from people who have been through extensive training and have a valuable knowledge base are worth gold for people like me who do not have the depth understanding but have the power to reason...

Hiya Mate, I disconnected the wires from the switch end and the wires went back into the connection points they came out of and I'm pretty sure they went back in the way they came out. But when the heating was on later and was off at the timer and at the room stat it led me to question my self...

Ok Last one on this before I swap the wires. If the wires from the frost stat have been swapped will it: A. blow up? B. Blow a fuse C. Override the room stat and keep the radiators hot D. Have no effect what so ever

I fitted a new pan in my down stairs loo a couple of months ago. I had a similar problem. I found that because it was a different shape than the old one the flexi waste pipe didn't quite make a seal at the back of the pan and the result was a bad smell. because of the angle of the pan to the...

Hi, Next to the boiler, a Ideal Classic RS250 Balanced flue is what I can only describe as a light switch Wire A goes to the boiler. Wire B goes to the Frost Stet and the other wires C go into the ceiling to the Airing cupboard I assume. If the wires from B are switched, will it make a...

Once again in the seven years I'm sure that cracks did appear it didn't JUST fall down. If I was a sage regarding electricity I would not be asking for advice. I'm glad your feeling generous, I would just like the question answered and no more analogies. I get the safety bit and all that...

Not a very good analogy as were dealing with electricity. if something only goes one way and it works and putting it together the wrong way around has an adverse effect then it will not take ten years to figure that one out... So back to my original question, assuming that for ten years the...

It worked ok for the last 10 years so I assume it was wired ok in the first place

Wiring in the stat hasn't been touched. It is the wiring where the mains goes to a switch then a two core cable goes to the boiler, a two core cable to the stat and two 3 core cables go off to I assume the room stat and the pump upstairs in the airing cupboard. The stat was disconnected at this...

If it was wired up back to front, could it result in the room stat being bypassed and the heating staying on when the room stat was set to off???

How do you find out if it a mechanical switch???

2 core cable, one brown one blue, one goes to a live in the box the other goes to the switch. what would happen if the were wrong way around?

I'm no plumber but the thought of all the **** that will line the pipe and you "smashing" it to find the blockage is ugh.... can you not take the toilet off then run drain rods in to clear the blockage???

Thanks to all for replies about my boiler packing in, now I have a new problem. in eliminating causes of my boiler not working someone suggested a possible cause could be the frost stat. I disconnected the frost stat. it turned out not to be that but a bust gas valve. however as you've probably...

Turned it down, waiting to see what occurs.... Cheers All