Search results

  1. S

    1930's house loft insulation -vpl or not

    The eves of our loft are already insulated to about 300mm, the middle bit that is boarded and used for storage etc is boards screwed to the rafters ,so only 100mm if any at all. I've been researching (sorry) my current plan is Vcl Insulation up to 300mm Loft legs and reboard The plan is lift...
  2. S

    Adding a radiator to an existing system

    We had a kitchen extension added to the house 2ish years ago, as we had electric underfloor heating before we asked for this, currently no idea what the spec is as I can't find the paperwork but it's not upto Heating the area. The kitchen is 6x4 mtrs with a vaulted ceiling of approx 2.75mtrs...
  3. S

    Purlin removal

    Yes and still is
  4. S

    Purlin removal

    The pics above, 2nd pic is the otherside/new loft 1st pic As far as I can understand the orange bit can be removed as it was just holding up the tiles which are no longer there and the perlin is there to support the rafters, which would mean the dwarf/supporting wall could go too Should I up my...
  5. S

    Purlin removal

    []
  6. S

    Purlin removal

    Pics to follow We had a extension, which included a new loft butting up to the old loft, currently there is no access between them as there is a purlin, membrane and rafters in the way, the tiles have been removed Correct me if I'm wrong, the wife would, the rafters are only there to support...
  7. S

    Ideal Logic 30 combi - not switching on

    Why? Whats up with that?
  8. S

    Ideal Logic 30 combi - not switching on

    We appear to have heating, i'm assuming that the blue and brown went to the old wall stat, has not been in use since this boiler was fitted about 4yrs ago Not even on the wall, very strange Not as if I had better things to do Thanks for the advice nwgs
  9. S

    Ideal Logic 30 combi - not switching on

    Just removed them and replaced them with a loop, the display showed rad temp and said central heating. Just switched it back on and will test and get back to you
  10. S

    Ideal Logic 30 combi - not switching on

    This is where it normall fits, just pulled it out for access
  11. S

    Ideal Logic 30 combi - not switching on

    Currently this is what I have. The two black wires are twisted
  12. S

    Ideal Logic 30 combi - not switching on

    When i reset and hold i get -------------------
  13. S

    Ideal Logic 30 combi - not switching on

    Yes we have switched live and hot water, just rang ideal and they said change the pcb
  14. S

    Ideal Logic 30 combi - not switching on

    Whats a s/l? Have power up to the pcb, when I switch off or do a reset it goes through the fan purge etc The pictured part on the pcb is quite warm
  15. S

    Ideal Logic 30 combi - not switching on

    Morning Whave a ideal logic combi 30, tried to fire it up yesterday to no avail, this morning things I have checked: Pressure nearer 2bar than 1.5 Salus rt500rf is reciving the wireless signal and showing the green light, also using a multi meter on the thermostat wires shows continuinty. I...
  16. S

    Built in wardrobe sorage solutions

    It means the wife can put long dressses so don't touch the floor and we can fit more in with a fixed rail underneath, having a rail just below the ceiling is awkward as i'm 5ft 8 and the ceiling is quite a bit higher
  17. S

    Built in wardrobe sorage solutions

    The master suite(get told off if I call it anything else) has two areas facing each other of 150cm wide,70cm deep and about 2+mtr tall we had sharps round for a quote/laugh and the 3.5k to 5k was a bit above budget. we are looking at pull down rails at the top, possibly trouser...
  18. S

    Block and beam floor- insulate underneath

    The builder did it like this, I would like to completly cover it with insulation, that would also become the ceiling of the garden room
Back
Top