Search results

Yep, euro46 v10 Ideally I'd like to be able to set/unset from my phone but also have other people be alerted to any alarm activations/if it goes off (dialled or sms'd not via push on an app which they wouldn't have) Can the GPRS+ SIM work alongside the standard landline dialler?

I have a pyronix euro V10 system. It currently has a standard v2tel dialler. I would like to add some form of digital access (for the app). I assume I have a choice of the LAN or a GSM/GPRS version. As I understand it the LAN version will NOT dial out or alert in any way other than push...

So 90mm 10mm gap is considered full fill then if I have a 100mm space right?

I don't need any internal wall celotex with this approach though What about 100mm celotex, I has a thermal conductivity value of 0.022 and the unilin 0.021. can't be that much different?

Would you mind letting me know how you calculated that! Just incase I get a different type of full fill 100mm cavity ?

Thanks! Would these be okay then - full fill 100mm as you mentioned above. Cavity is fixed at 100mm https://www.insulationshop.co/100mm-unilin-thin-r-ctpir-cavitytherm-full-fill-insulation-pack-of-4.html?limit=50

It's an extension to the existing house on permitted development. Existing house is 1930s

Only applied 4 months back

I assume post June 22 as I'm building now?

I have just had the builders round to do the DPC layer of semi-engineering bricks and they have left a space for insulation which they say should be 100mm when moving into the rest of the wall (not at DPC layer) What are people using in between these cavity walls? Should I get a typical cavity...

went with pyronix euro46 setup, wired pirs, bell, keypad, wireless expander unit for door and window sensors.

I've read lots of these posts and most have been done to death but i've still not managed to get myself a solution. I'm looking for a system in a new home. Wiring is in place for PIR's, bell and keypad but everything else i.e window and door sensors would need to be wireless. I also have an...

Did, next to useless

Sorry should have mentioned I'm trying to descale the boiler tank itself . But trying to do it safely as it will house hot drinking water after

Hi everyone. I'm new here and looking for some help. I have a boiling water tap which is second hand and has been used without any form of descaler filter for some time. I am trying to descale the boiler that comes with it. But in a safe way that will ensure it is okay to still use as a...