Search results

I got the Trojan hinge just for info.

ok thanks mate will try wen i get back home.

Hi here is a pic of the hinge The gap is across the top of the door not just the centre

Hi, I have a back door and over the weekend noticed that there is a gap at the top where the door meets (or is supposed to meet) the rubber seal. I can feel a draft and can also slide a card into the gap. I have adjusted doors in the past to align them vertically but never had to close the gap...

It’s on iOS but sure you can get it on Android. Just search for Texecom and see if it has the keypad app.

Hi MrT2, ive got the Texecom Premier Elite 24 with an external GSM dialler and ComIP installed. I got full control of the panel via the Texecom Panel app where i get full notifications and full control. I can part arm and full arm with one keypress on the app and the keypad itself. Have also...

Hi I managed to make them almost flush by wedging some card in the gap and then tight butting the above board against it. Once scrimmed over hopefully it should be ok

So i get home, still on 3g, and i get a notification on disarm! I've stayed on 3g, and entered engineer mode and got a notification again. So hopefully it works now...

Just a quick update, seems like i dont get notifications/alerts via the app when im no on wifi. Even though on 3g i can use the keypad, smartkey and view the logs, i cannot see/get any notifications. I have port forwarded 10001 but seems like i am missing something else?

Morning everyone. Just a quick update, it’s working! Got the arm notification last night and this morning got the disarm one too. Test call now works as well. Thanks for your help everyone. Got there eventually.

HI, it’s a premier elite 24

Here is the latest output

Ok will give that a go...

It’s on com1

Nothing comes in via the app so assume I’m missing a setting?

So have set this But on a test call I get...

Thanks for the reply guys. I’ve done the change and added connect via ip. I’m sure I only have 1 area so don’t think I need to change that. Do I need to do anything with option 8 as I selected Contact Id as the arc protocol?

Hi, don’t really want to take off the insulation. Will try the strip method first, if that fails, will try the glue option. Will try this next few days and will update this post.