Search results

Your WC should be fed from the cold supply before the UV combination valve .

Why dont you just get a readymix company to deliver the concrete ?.

Gas guru wrote Not at all. Come now, circulating pumps don’t give very much trouble. No different from combi boiler installations where you have millions of em fitted. [code:1]Mixing valve to scale up and fail [/code:1] In hard water areas yes. Same problem with any...

The uv cylinder ?. The garage for ease of piping the discharge pipe which is an important part of the installation. The pandoro ? Loft space , as piping is a doodle but if you have a 1st floor hot press where you have space then thats where I would put it. Remember you can diy...

Paul Truss wrote Chelmer say their thermastore tristore has a recovery time that is three times faster than a conventional UV cylinder. This one is integrated with the heating system though. Heatbanks Pandoro looks quite a good piece of kit and would be suitable for what you...

The problem is NOT the cylinder size . My cylinder is no bigger than this and a plumping hot bath is no problem at all and still some hot water left.

Get your daughter to do it. Her hand will be much smaller and flexible. 8)

Could be debris lodged inside the valve or a scale buildup. :( Are you in a hard water area ?. Oventrop state that inline filters are important with this valve. Are these fitted ??.

Id rather have a dull person fixing my boiler who is competant and knows what they are doing than some comedian who may not have a clue.

I think the UPE15 has a combined pressure and temperature sensor. My MI's state that the differential pressure is sensed through pressure variations and constant or proportional control can be selected.

Thanks all. I have suspected the charger is faulty as the amp meter needle stays at zero when turned on. We used to have a little charger with a needle that jumped up and then slowly returned back down which I think indicated the battery was fully charged. PS. This one...

Hi everyone. Just connected my sealey battery charger to my van battery and left to re-charge overnight but the battery is still as flat as a pancake. It says 20A output on recharge and 80 on boost. How do I know if the charger is putting out a charging current ?. The fusible...

Mr Banchmark wrote So if we say this is an 18 percent saving then are you saying a circulator pump costs about £100 per year to run.?

Any one know the difference apart from price probably and the former having an optional remote controller ?. When it comes to proportional pressure everyone recommends the alpha auto variable speed pump but it seems the UPE15 has the same capabilities and then some. :)

steveo46 wrote Sounds like you need an electrical technician ,not a plumber . :( Dont these have on board diagnostics ?

Those look very aeshetically pleasing to the eye but their outputs are quite low. :( Scandavanian ??. Very impressive stuff oilman. Good link. :D

kakkleovens should read kakkelovns Well the information came up under this spelling anyway. :o

Does this stove exist ?. A dunsley back boiler could be installed which are not that expensive and linked up to the CH system with oil or electric as backup.

oilman wrote Have you a link for that oilman ?. Tried a search and nothing came up. :(

Oil fired underfloor heating . :)