Search results

offered by veissmann and yeah i have to have it serviced by one of there trained installers. The guy that installed it is one of these so he will service it for me. I always have the feeling with warranties etc they will try their best to get out of paying for anything. Were they straight...

I wouldn't like to take a pan off :cry: Has your rod set came with a plunger tool? I would try this or an ordinary plunger and hope you can build up some pressure to shift the problem. Personally I would lift that manhole if you can as if this is clear then you know its blocked before this...

hi all, I recently had a vitodens 100 installed and have the option to take out the additional 5 year warranty for £225. Making it covered for 10 year. Anybody have experience of these types of warranties etc?

thought you had to insulate to comply with regs?

guys, 22mm central heating runs ran under ground floor in the cavity. Double clipped next to each other so the standard 19mm insulation does not fit now. Cant even get the 13mm round either. So far on pipes that run under the joists, I have fitted one length, then trimmed down another and...

no drama's it happens to us all :) was just really a case of I had no signal and it was because input 1 had come loose from the f connector and I was wondering why it didnt just continue a signal using input 2. When I removed to re-terminate I lost all signal so it appears 1 must be...

i was referring to the inputs of the incoming cables from dish?

does input 2 only work if input 1 is connected and has signal??

thought so, thanks :D I have also found some corner valves which seem good, but pricey also, the little amount of copper that will come from floorboards to rads will be mostly behind skirting but will be in plaster for little bit. Is gaffer tape sufficient or do I need to think about...

hi, usually these are vertically mounted. However, I will have 15mm copper straight out of wall and want to put this into the l/s but this means mounting it horizontally. I suppose this makes no difference however I've never seen it like this so was wondering on other opinions??? I no I...

not really a concern of your's is it? It is no problem whether it is there or not. It was just something I decided I might have like to do. Maybe I'm constructing a secret tunnel into your back garden and when you least expect it, i'll burst through your lawn and pepper you with gun fire...

yeah can see your point about papering a door been a bad idea. could of course build a frame and plasterboard over that and then paper. Only thing I could think of would be to use some beading at the edges and then plaster over it to give straight edges etc. Was just hoping somebody may...

hi all, TBH i dont quite know how to explain this correctly. Have an under stairs cupboard, small door with architrave round it etc. What im hoping to achieve is remove the architrave and plaster right to the edge, get a new door that is a better fit, have everything wallpapered and...

have you used universal starters? what wattage are the lamps?

is this a joke? was your "chartered surveyor" Stevie Wonder? Been on a plug is fine, usually. However not terminated like that!!! Using T&E!!!! Redo or get it redone and enjoy your new home

the red/red should be your switch cable, I would check this with a continuity tester. If this is the case, one of these and the other 3 reds together in separate block, 2 blacks and blue together to your new fitting N, the other red from twin red cable and yellow to the L of your new fitting...

OK cheers for everything. I'll be back on that site prob monday so will grab further details and let you know. In the meatime I'll check out that seimens version thanks

no not really but there's a lot of standardisation you also have to consider operating voltage and control type Its not long that I fitted one of those so I am surprised that they are now obsolete, but don't worry you will get an actuator that fits, you will req one that has a fail-safe...

tried parts centre and it was them that said I couldn't get one. However I did ask for one like this and he was trying to get a like for like so maybe he never realised another might fit. It is an SQS series :) but I dont have a pic of label. I could maybe get one in a few days How does it...

guys I hope this pic works and aint too big. This is my valve and actuator. its a landis & staefa and is 24V AC. Valve has nothing on it I aint no plumber but I can do the job, once I have the gear. I just do not know the items or parts etc. Been to a few places for parts and have had no...