Search results

Hi have refitted the replacement and now I have hot water and heating water from y valve but only it seems when the HW is active and the radiators seem to to taking a long time to warm, almost as if the pump is still not working properly but the pump casing is hot and if I put a screwdrive to my...

Hi back again. I bought a replacement y valve head and tried to fit it this morning but it didn't plan out as expected as the replacement was a very tight fit and the water pump didn't want to work and ir kept clicking. As always I made a careful note of which wires I was working with. I...

Apologies but need to park this for a few days as have a family issue to resolve.

Good morning, have checked but unable to find bleed valve. Haven't got time to take the power head off the valve as going away for a few days.Will have to sort out when I get back. Fundamental question is should I buy a replacement replacement valve head or would that be a waste of money (not...

Thanks for the updates. As far as I am aware there is no bleed valve near the cylinder only a drain down valve but I could be wrong. I was hoping it would just be a case of changing the 3 port valve head as this is something I could do OK as there is no draining down involved and I can buy...

Hve set to manual and can hear a pulsating sound for about a minute then silent and can feel water passing. Have to see how hot the water is later but still confused as to why the pipe into the tank isn't hot all along it's length. The top outlet pipe isn't getting as hot as normal think a...

Thanks will give it a try.

heating is permanently on at moment controlled by room stat, should I turn heating off and see what happens. Read that if I set honeywell to manual it might reset itself.

Hi This morning I found that our water wasn't very hot. We had a similar problem a few of weeks ago and then it seemed to sort itself out once I tweaked the auto/man lever. I have checked the casing of the valve and that is hot and I can feel there is hot water flowing out of the valve to the...

Hi, apologies for the delay in responding. I have passed all the replies onto my friend who is going to check the wiring in the main wiring box and check against the 92DE to see if he can spot the discrepancy.

A friend of mine has recently changed his room stat for a Honeywell DT92E wireless. Since making the change everything seems OK except that his hot water will only heat when the heating is running. He has a Danflos EP7155Si programmer. Can anyone help with a solution (which I am assuming is a...

Thanks for all the advice

OK thanks will try a trimmer

Thanks for the reply used to have some of those blades years old but never found a use for them. Have seen hand held laminate trimmers on eBay would they be a better option bearing in mind I will be trimming from underneath...

I have had to fit a new section of edging strip to my worktop. I have fixed it with a small overhang on the bottom edge (perhaps a mistake) so I get a flush fitting on top. What is the best/easiest way to trim the excess off please?? Thanks

Thanks Blup The flag hinge cover seems to be in two part but nit worked out how to prise it open, can't see any button or the like, don't want to use brute force and damage it. Looking at the link you gave the adjustment options seem to be up or down, or left to right, doesn't seem an option...

I have just fitted a new rubber gasket to my back door (which leads from the kitchen) as the original was not working properly. Now when I go to close the door the bottom closes up against the gasket before the top. The door will close with a little effort and locks so at least the property is...

I have made a claim on the warranty through iwa that came with my double glazing as the installer has now gone out of business. I have had a terrible draught around the door and the handle wouldn't spring back. The iwa "engineer" said that the flip type gasket is useless as it has gone flat and...

Thanks Dan much appreciated.

Hi, recently posted about using the DT92E as replacement. Pleased to say it is working OK. The transmitter is now placed in our main bedrooom which is the coldest room in the bungalow especially at the moment with the very cold wind blowing directly across the field at the back. With the...