Search results

If the neutral from the switch is isolated from the switch (crimped onto the black from the cable coming in and passed through without modification... i assume from the 2 way in the wall) then can it still be live? Have looked at the links but none of the diagrams show any resemblence to...

"Somewhere you've decided that if it's black/blue it's a neutral, and it won't be" Yes I did make that assumption... I just assumed that the red/brown from the switch would be live since the blue/black was not connected only passed through... if you know what I mean. Shall I try it the...

Sorry folks, Trying to do too much at once. Correction as below, Basically the same as the instructions minus the feed out as last in loop Neutral from switch to live on rose (Line) Live from switch to Live (Loop) Neutral from Feed in to Neutral on rose Live from Feed in to Live (loop)...

Hello, Have ceiling rose on landing fed by 2 way switch (other on ground floor in hall). This is the last in the loop so there is only one line in plus cable from switch. Have connected the rose in the way shown in the instructions (minus the line out)...

Yep makes sense but if I have the option of single / double radiators vs the required output for the room I would probably go for what looks best (i.e. longer single panel radiator) Not sure now though

Sorry if this sounds like a stupid question but I am measuring up for radiators for under windows. Do I find the closest match to the window width (i.e. 1600 window = 1600 radiator) or do I allow for fittings/TRV's i.e. 200mm (i.e. 1600 window = 1400 radiator). Not sure what looks best? Is 200mm...

Hello, In the progress of rewiring my home and I'm a bit confused (which is'nt difficult). I plan to move the point at where the telephone line enters the house to a location that will be in the same place as a server and switch for home network but also want to understand how/what I need to do...

Ah, I did'nt know that thanks. 115mm would be easier for me to get hold of at trade cost

Excellent. Many thanks

Hello, I'm replacing some old internal nonstandard sized doors which will also require me to replace the door casing. The timber of the studded wall is 75mm with 12mm plasterboard on either side (total approx 100mm). Not sure the width of casing to get though ive seen 100mm casing, 106mm...