Search results

I've also tried a new programmer! The only way of getting the boiler to light is to put a wire between live and switched live. Anything to test / try?

Installed a new PCB and still the same problem. There is no power on the switched live. The fan makes no attempt to start and there's no power going to it or the CH pump either. Could it be the air pressure switch?

Where would I test for voltage for call to heat Tony?

Hi All, As the topic says she won't fire up at all. Not for hot water or central heating. I've reset the programmer in case that was it but still no good. No spark, no fan coming on, nothing. There is power to the PCB though. Anything I can try? Cheers Daz

Hi All, After sanding down our living room floor I left it to my wife to apply a coat of Liberon dark oak wood stain (water based) to the floor whilst I laid down as I've done my back in from all the sanding. 80% of what she's done is great but there are some darker patches where she's...

Thanks for the reply. What about a weak mix of PVA and water?

Hi All, I've revealed one wall in my dining room back to bare brick. What sealant can you recommend to give a matt finish? Cheers Dazz

I'll be signing up to the BG Homecare 100 scheme with a £99.00 call out but the earliest they can come is Tuesday next week. Is there no way of getting the main valve to open?

We replaced the gas valve and still the same problem. It appears there's no power being sent to the main gas valve only the pilot so can I assume it's a PCB?

I've removed the case before to replace the fan.

What else could it be and how can I check....got a cold house and screaming wife!

All things point to either the PCB or gas valve. Is there a way to check either?

Hi All, The pilot does light but there is no main burn. I can see a small spark every second or so with the cover removed. Does anyone know what's causing the boiler not to fire up properly? TIA Dazz

Ladder a nightmare!

Well the clayey area is what needs decking and as it's clay I'd like some advice on what footings would be best. Then there's the shape. The pool is octagonal and I'd like the decking to look as good as possible and hug the pool and the surrounding area. The pool nearest the patio is higher then...

looks great. seeing as you're now an expert perhaps you could look at my decking post and offer some advice? http://www.diynot.com/forums/garden/decking-advice-needed.367064/#2789279

Can anyone help?

Hi All, I want to install decking around our above ground swimming pool. I've added some images. Can anyone advise a suitable method / design as I've never laid decking before. I assume I'd need to dig out some of the area for small footings? The area without any grass is the extent of the...