Search results

What network are you on, could be an issue with signal strength, (like there isn't any) check the network operator for errors in you area, had this in Bristol this week Vodafone was down for about three days due to some cable damage at a base station.

Rip them off, clean them up and start again using a proper bagged adhesive, also what substrate are these going on? Have you taken into account the weight of the tiles, adhesive & grout for the surface you are tiling on?

The difference is that 00 will activate ANY intruder alarm, 61 will activate only and intruder alarm, and not a Tamper

Unintentional, i now realise what i have written :oops: I would agree with that one, not the best way to go about things, and not the way to operate.

The simple fact of the matter is anybody's equipment can be bought anywhere online and over the counter, i have never advertised who i work for nor mentioned it in any posts, but if i can help i will, if there is any issue it is the supply chain and NOT the manufacturers.

That does not mean you should use it, what you want is Zinnser Bin 123 http://www.zinsseruk.com/Shop/Product.aspx?cId=130&pgId=354 i think, like already said, best asked in the Painting Forum.

:mrgreen:

[/url] LOL :mrgreen: get my Ipad next week, now i'm scared.

Have a look here http://www.victoriaplumb.com/?gclid=CPLuluLnnaYCFQ1O4Qod00_DZw good prices, not sure on the quality, i have just ordered all my gear from there and they were much cheaper than anywhere else.

Something like this will sort you out, use masking tape when you have marked the centres to stop slipping and chipping http://www.screwfix.com/p/plumbers-holesaw-kit-6pc/11002;jsessionid=cngXNxmNNLPKtPMknTvN5MMLd5pbLKn1yNhZJ1LvRd02H5HsMNvH!851758913

You will know that when you start pulling the tiles up, I have asked for this to be moved to the tiling forum where i think it is better placed and you are likely to get advice from the Pro's, i am not just a keen DIYER who has learn't the hard way in the past.

So was it fully dry when you tiled?

Nope you will have to rip it up, was the adhesive cement based? I assume it was, but Unibond is not a make pro tilers would use. What is the substrate made of, concrete, floorboards, chipboard etc....Suspended floor, floating floor? I suggest you read the tiling sticky and search the...

Sounds like the inpiut on the contact itself, there are two staples fitted across iinout1/2 & COM, take the staples out and fit a small piece of wire, and see what happens.

Isn't there something called Thinset?

Sorry i have no idea, i am sure someone else will, but why are you connecting to a water meter, surely that's the water boards job?

1. Yes 2. No What are you trying to join it too?

Agreed, however i have seen brown on white with silicone tools and no tape, but either way, it will work. Stick by my first post, patience, and years of experience.

Nope, most pro's won't have the time or the inclination to mess around with that, like i said years of experience, for the DIYER or Ametuer, then fine you could do it, but with a little practice you can get good results without using tape.

Practice. And years of experience.