Search results

Like this perhaps http://www.screwfix.com/p/universal-compression-flexible-waste-pipe-32mm/86148

And depending on the machine, the Hot feed is usually only used for "boil" wash, or the hottest wash, check the manual for your machine.

No just saying what i would use, as i said further up the post i am no expert, all i knew was PVA is wrong, and os is Unibond. :D

If it was me i would use THIS Check out the data sheet on the site for further instructions.

OK your floor, i am no expert by any means however i do know two things one is do not use PVA, second is do not use Unibond, use a trade addy and the recommended primer system for the surface you are tiling on. I believe with BAL and the likes either acrylic primer or SBR, if you don't want to...

First off DON'T USE PVA second i would not use Wickes adhesive, do a search in this forum use a proper addy, BAL or the like. I am sure someone much more qualified than me can explain more

If you are registered on our site, you can download it, you can wire any way you like, however cable lengths will determine the best method.

OK i am struggling now, i have Googled it and not seen anything the same as your situation, but many pages regarding errors with that file, most point i think it will be something to do with an installation. When you installed Open Office, did you install the latest version of Java? If not...

Did the problem start after installing one or both of these?

Have you installed or removed any programmes just before this started happening?

Hi Percy, go to Start, Programmes, Accessories, in their you will see the command prompt CMD, right click and choose run as administrator, then type in sfc /scannow and hit enter. Note the space between sfc and /

Thanks John, you could not have read my previous posts regarding TRV and insulation. I have already mentioned it above, and have these installed to the max. However i already have a stat which is wireless to the boiler, we leave this at a set temp during winter and different during summer (in...

Try running Malwarebytes and Superantispyware, links for both in the sticky at the top of the page. If that don't work try this:- Open a command prompt, as an administrator (right click "run as administrator") type sfc /scannow into the command prompt window this will check the...

Can you expand on this please? Is it because we are not keeping a consitant background temperature and therefore heating from scratch?

Thanks adl, how do i go about getting a full gas test done, and what is involved, what will it tell me? and is it a gas company service, or can i get a local registered guy to do it. As for the rads, yes they all get hot top and bottom, i have replaced a couple of rads when redoing rooms, in...

Thanks for that, yes i know the winter was cold, could not get out of my street in a car for two weeks!!! The house is a mid terraced Victorian property with a loft conversion, conversion was done about 5 years ago with approx 150ml Celotex + airgap used as insulation on the roof and 200ml...

Hi all, had one of these for about 5 years, the only issue i have had was a diverter valve failure which was replaced about 2 years ago, regularly serviced, runs 8 rads and a towel rail, 2 thermostatic showers (not run at the same time), no cylinder. Also gas hob. As the prices of gas have...

And if they both move freely check the brushes

Had this on mine, turned out it was the brushes in the motor, bought some of ebay for £15.00. Job done. If you are not confident taking it apart get someone in, and if you do do it yourself, make sure you unplug it, and isolate the water, electric and water is not a good mix.

In programming simply set zones that are not being used to NOT USED, no need to link them out then.