Search results

Sorry Third Eye The plaster board is underneath and the plaster has been applied over this and then painted on top of the plaster. There is no paint between the plaster board and the plaster layer. The painted layer is what you would see when you look up at the ceiling. I hope this...

No water leak and or staining. Just moved it, it looks like it been there since the house was built 8 years. Just got a bubble that has come away Please any advice Chris

yes, underneath the painter ceiling layer, yes the plaster board is bear as I can see where the nails hold up the plasterboard to the ceiling Hope this answers your question

Hi Just noticed a Large bubble found in the ceiling, at first I thought somebody may have put there foot through it, but upon closer inspection and by pushing with my finger it looks like the redish plaster is coming away from the plaster board. My questions are Should I remove all of...

Hi Could somebody help, by telling me if the new style LP 241 and or the LP 522 will fitt onto the existing electrical template (old style LP 241) without the need for rewiring any or all of the backplate Cheer Coops

Kevindgas When you said you always change the temp stat on these boilers. Do you mean the drayton cyclinder thermostat or another some where with the boiler itself? Cheers Coops

Hi Changed Thermostat as Chris R asked if it was in good condition, well it look okay but did not seem to switch the pump off when boiler reached temp. So since I have changed Temperostat on Immersion heater (exchange / storage tank) the system seems to be working better, but the water...

Hi We have a set of French UPVC double glazed doors that lead into the conservatory that are very difficult to close. In fact the handle has bowed. We moved into the house a week ago, to stop the problem I have removed the door seal, but there is quite a draft. Any ideas as to why the...

Cheers for everybodies help in this matter. I have found the unit (PCB) on ebay part 511160 or 5111603 this unit now comes with a casing around the PCB board, is this correct and also is it a straight swop item (Plug and Play)? Any advice on installing one would be great. Cheers Coops

Does anybody know where I can get a recondition PCB board for a Potterton Suprima 40 ??

Where would the temperature sensor be located? There is a themostat on the imersion heater in the air cupboard is that the one your talking about? Cheers Chris I hope it's not the pcb - Boiler is 8 years old

Hi Cheers for your comments, please keep them coming. I have managed to get Hot water and Heating at the same time, so all good there, now my problem is extremely hot water. I have turned down the Boiler Thermostat ((Boiler Range (55 C to 82 C)) to it's lowest setting at about 55c...

Check header tank, full of water - looks good

Hi I have a Potterton Suprima 40 boiler with a Myson Compact CP53. My Problem / query I have just moved house and the hot water and central heating work independently of each other, but when I tested them on together the central (radiators) are very cool. I have bleed the radiators and...