Search results

Yeah thanks, I will give that loop a flush through tomorrow, cheers

I have a 3 port ufh manifold, taking temp of all flow and returns, the 1st on manifold has a flow 4 degrees lower than other although return is similar, tried playing with valves but still cant get flow up to near others, any thoughts?

Laying large format porcelain wood planks onto level screed floor, would a RAGNI R319-10 or RAGNI R319-20 be best to use?

I am looking at 2 types of porcelain floor tile, we like both but one is made in spain one in Italy. Are both likely to be similar quality or is it difficult to say? Italian one slightly more expensive

I spoke with Ardex tech guy to see if either could be used, he said if going down on a sand/cement screed don't prime just hoover well to remove dust, but no primer needed? Is that a good idea? Looks like the Bal is acrylic the ardex is water based.

Looking at adhesives I was opting for bal Single part Flexible with bal apd primer. Now tempted at getting Ardex X7 tech spec looks same as Bal but cheaper , so question is would the Ardex P51 be the equiv of the bal apd? To put down on sand/cement screed

can anyone recommend a good laser to use on floor tiles to help get a nice line?

Personally I use Porcelain on floors as harder wearing and ceramic on walls as they never get foot traffic so not likely to wear. Get a good drill though and drill on slow speed you can cut porcelain ok

Very true, although I have quite a few cables in this trunking, room to breath. Oh well maybe next time

Yes singles £15 a length of 100 x 50 appeared good value, cheap enough and prevented me having to have cables buried in a wall, I utilised the void behind kitchen units

So maybe at 90 deg it would allow easier access to terminals and allow the flex cables with plugs to fit nicely. Thanks John

It makes more sense for me really as cables from appliances will be coming down from above.

I want to have sockets for appliances mounted in a dado type trunking but on the floor behind kitchen units ( fits the void better than the 3 compartment skirting trunking). The only issue is it is too tight to actually plug something in with sockets the ( normal way up), flex too tight. Can...

Can't say i have ever had that issue with light from downlights, the last house i changed all the daylight bulbs for warm white as the kitchen was far to light. Personally i would not fit a fitting where the led bulb was not replaceable as the 40000 hour stuff is just nonsense. My wife can...

Look nice in the office

I guess it depends on what you want to achieve. I want feature "proper" lights on my Island therefore want downlights to be non feature and blend into ceiling giving light but not taking away what i want from my feature lighting. Downlights can be pointed where you want them or these days get...

little torches it is then, thanks for all your help

I guess I could always stick a few 500W floods in as backup.

Matter of taste and what you prefer, I like downlights, you obviously don't

Well i find my rooms more lit these days than ever before, i guess it depends on what bulbs you use and how many.