Search results

hi all, I am trying to get an understanding of how my relay board works. there are no manuals for this obviously because this is obsolete \i believe. can someone please give me a kind brief on how I connect this up before i break something i cannot repair. the 9076 board has the...

hi secureiam, no you do not appear rude at all. you are right. I have got it sorted and it now works thanks for the help. I guess the moral is " read the f***ing manual".

hi again, just a few more questions then i'll be out your hair. 1: the 9076 relay board plugged into the main panel. I take the panel already switches relay on alarm according to which trigger, intruder, pa, fire,. I take it I just need to select the appropriate polarity using either the 12v...

sorry spark you must have replied as i was responding to secureiam. AHH so on the relay board use the 0v and link to the common on each relay then connect the relevant triggers to the normally open on the relay?

the 9600 relay board has 4 relays the ones i'm using is aux(fire), nc c no, pa nc c no, intruder nc c no. should i be connecting the triggers to normally closed or normally open?. or do i need to use a link wire to link the 0v to one of the triggers in the dialler?. thanks

i have checked the manual and it has no diagram from dialler to panel. just a diagram for positive or negative operation. I am quite sure the 9600 uses a negative trigger but i'm unsure how to set it up. cheers

hi guys me again. sorry to be a pain the ass, but need pointing in the right direction. I have connected the texecom speech and text dialler to my scantronic 9600 today (time off work). the alarm works as normal triggers the sounders ect. but the speech dialler does nothing. I will explain...

thanks again :) cheers now

bump please. cheers

thanks man :) texecom it is. just one more thing will this old girl support this extra current?. i'm guessing it can but what do you think?.

I guess the current draw from each dialler will be less in reality. will my 9600 just be able to source this extra current?. I do not wish to install a power supply (messy) I think the manual said the panel can support around 1250ma ish maximum depending on the temperature but I could be wrong...

hi there me again. I am looking to install a speech and text dialler to my trusty old scantronic 9600. I am stuck for choice of which dialler to choose. I quite like the texecom dialler but I am unsure if this has a non volatile memory it does not say. my other option is the menvier sd2. I...

thanks :), you learn something new everyday.

thanks thats very clear :). hope you had a good day. just one thing is it just a simple joint per house to main cable or do the joints have multiple cables leaving it?. I'm just very curious :lol: thanks.

so in this case would it be around 40 houses per phase?. so as the cable leaves the transformer it splits up in junction boxes. sorry if appeared rude it was just no one answered so I assumed they didn't know.

must be too technical for this site. I will try elsewhere.

hi there, probably not the best site for this question but here goes. I live in an estate with approximately 250 modern houses. there is transformer in our street in a large grey box. so with nothing better to do on the weekend I had a wee peak (obviously I did not go inside it). Anyway I will...

I'm sure i'll be fine. thanks for the heads up.

where did you get 800 ma from?. the panel can support 1 amp.

wow that was quick :).i will program o/p3 for the internal. thanks again.