Search results

i want to turn the rad off in the bedroom that has the combi in ,it is to hot in there One of the valves has TRV how do i shut it down .Do i just turn the one off you use to balance system or do i have to turn the TRV of as well .If so how thanks

thanks i will have a look tomorrow

They aren't the same valves I used to pressurise the system are they

Thank you I will try looking for th valves

I have got as far as obtaining domestic hot water but when I put boiler onto CH. I get L2 flashing twice before it goes onto C but know hot rads. Thanks

ok once again thanks I have "looped" the thermostst 2 wires ,basic tower thermo as suggested and the boiler kicked into life with the symbol C which it didnt before i "looped" it So its supplyng the rads I ran it for a good 30 mins but no sign of heat coming through any rads Iwas going to...

i understand , Could i switch of mains and loop a wire across the 2 terminals in a junction box in the gas cupboard that supplies the stat and is live i have checked It is easy to get to or use your method thanks

Done all that bled the rads kept the pressure bob on Now i have a problem the domestic hot water is fine and the boiler kicks in great but wont heat the rads i have reset the boiler turned the dial to heating setting but it doesnt show anything on the display just a 0 AND d when i am on...

great stuff .So i will be running up and down the stairs i assume Or is it something i should cope with alone

thanks for that So when i have done that and got the pressure to 1.5 Can i then bleed the rads.

My daughter has a ideal logic combi that has air in the system and i believe needs pressursing Her partner has done one and we need it running It was fine but he chose to take a rad of for decorating and that i believe is were the bleeding is needed Can you tell me how to get the presure...

Door hs sprung and I need a not to runny quick setting glue before I clamp it up any suggestions please Thanks

What a game i am having trying to keep the edges stuck down I apply the adhesive to both sides press down back of paper to vinyl side .wipe of surplus and the edges still turn up like well done bacon Is there a method or a good brand .Help please

thanks sorted

i have a seperate pump with a old 20 amp neon switch that has gone tits Would a 13 amp neon brass switch that matches the other points in the room be ok

Hi i need to remove the front cover The timer is on at a jaunty angle There are two screws on the top ,but how i remove it i dont know thanks

Yes i will make sure i get the collar and i need a new cutter oh and a bacon sandwich thanks for all byour help

ive got the wrong router its a bosch 1/4 ,so no collar .So me thinks best hire one for the day of HSS

thanks going to have to do a bit of checking here

About to purchase a jig of auction site .I wondered if the collar needed on the router is a standard size to suit all jigs bit confused about this bit thanks :?