Search results

Here's the data sheet which I think looks ok: http://www.bentleychemicals.co.uk/files/7T_product_Technical_Data_Sheet.pdf

The stuff I have is ceresit 7T sealant. Does that sound like it will do the job ok?

I've got some 70 x 70 pvcu angle stuff to clad my garage door frame which is in good condition with no rot etc. Whats the best way of attaching this to the frame? Polytop pins, silicone/glue or a mixture of the both of them? Is it worth pre drilling the plastic before using the polytop...

I'm on the look out for a 12" chrome cabin hook. Any of you guys know of a place to buy from online etc? They seem a little illusive to track down!

Cheers benyboy but I posted that two years back, works are all completed now:)

Its to go on the cold feed to the bath tap as this is mains pressure and the hot is tank fed. I found these ones http://www.dereve.co.uk/Dereve-Pressure-Regulators.htm and was just wondering if anyone knew of any other suppliers before I phone these guys on Monday. I would run another...

I'm after a pressure reducing valve for water that has an output that will go down to around 0.1 -> 0.2 bar. Any of you guys know where I can get one from as most of them seem to bottom out at about 1.0bar.

Its this style of sentry only a single RCD version: A split load with RCBO's would be cool... Its not for anything inparticular. I had mine replaced and certified a few years back and it looks like a road crash inside. I now need to add an RCBO and I was going to neaten it all up before...

After an internal pic of a super neat install of the above Consumer unit with RCBO's anybody got one?

In the bathroom upstairs I have JC94010 IP65 fire rated downlights, when I installed them I built plasterboard enclosures with 1.5 times the manufacturers minimum spacing around the light. Each box has a couple of 20mm holes drilled in the side for a bit of ventilation. I'm just about to...

Cheers for that, thats handy to know! The quote for the Profile 22 stuff comes out the more expensive of the two!

Is there much between these two profiles? I've had two respected local companies quote for replacing my windows and doors, one uses Swish profiles and the other uses profile 22. There is a large cost difference of 33% between the two quotes which seems a little excessive!

Cheers mate. Am I likely to suffer with syphoning of the basin waste?

I was looking for one of those but couldn't see one. Any idea where to buy from or just head off down the plumbers merchant?

Just a quick technical question. In the downstairs loo the basin waste runs out through the external wall in 32mm solvent weld pipe and into a boss as seen here: Looks ugly as hell outside the front door so if possible I would like to attach into the toilet waste internally. Currently...

Cheers mattysupra I managed to grind the black nastyness off rather than shot blasting then I used a waterbased compound. Getting it smooth was easy but getting it flat and level took a little more time! :D I'm nervous now about having the wood floor in the kitchen due to ware and water...

Job pretty much done. A day with a 4" grinder and one of these: http://www.screwfix.com/prods/53986/Abrasives/Other-Cutting-Grinding/Grinding-Cups/Erbauer-Double-Headed-Diamond-Grinding-Cup-100mm Removed the black stuff and created more dust that I ever realised possible! Then 3...

So far the advice from various tech depts has been: Sika: Scrape up the bitumen then use single part Sika Latex Levelling compound no primer. Ardex: Clean the bitumen, level straight over with Arditex NA 2 part Latex Levelling compound no primer. I was quite suprised by the no priming...

I see there are a few wood flooring experts on here so I thought I would pick your brains before i start work. I have some Atkinson & Kirby Diamond Range Multi Layer Walnut flooring (link) which I intend to lay in the kitchen and hall way. I intend to lay this over the concrete floor with an...

Luckily there is another rad at the end of the same wall. The pipes i want to cap appear to be t'd up out of the screed so the only dead leg I would have is the depth of the screed. which presumably isn't too bad?