Search results

[/url] abso-fu#*ing-lutely!!!

The fluidmaster is the valve. Interesting point though - the sharpness!! I will investigate. :)

My mistake...the pumps kick in at 3.8bar and then stop at 4.4bar. Does that make sense and is it set too high. Also, are fibre washers susceptible to damage by the reasonably high pressure.

Would 4.5bar and possibly higher do some damage to the fibre washers then? I have changed a lot in here as too has my colleague.

It's now 1439. Just checked the pressure and it's 4.5bar :shock:

We have a number of toilets in this block whereby the water is constantly flowing back into bowl. Now there could be a number of reasons for that, but they won't say anything to me or ask me to fix it, or get someone in to rectify it. Goodness knows how many toilets there are doing that but...

I have mentioned this before as to why the fibre gaskets I change keep breaking down??? In a dwelling, I believe one of the major reasons for the gaskets breaking down is the over tightning of the two components - the float valve stem and the incoming. Now, I manage a block of 72 apartments, 5...

I am really quite sick and tired of people using Part P as a qualification. "Part P registered - (where?) Part P qualified - (so; you weren't a qualified electrician before?) And so on and so on; you get the point; (i hope) What is it? On my business card I have put - amongst other trades...

Suffice to say Chri5 you scared him off........ :cry:

Both are acceptable!! It's like "an" (H)orse or "a" Horse.

Why? Securespark. This is the problem nowadays; when it is not obvious why a spur has failed - most sparks just simply remove it and replace it with another one. I open it up and try to find out why it has failed. It's like a nurse who has qualified and does not know about the anatomy and...

21 Ω

I shall answer my own question. v=240/ I=11.5 R=21 I think w=2.7kw/ v=240 A=11.5

I have searched high and effin low to find the answer to this question. Doesn't even tell you in the manuals or even on the Creda website. However, as far as I can tell it is a discontinued model; but still. Model number 70305S. SFHAW Sensair Fan Heater. Question: what is the rating or...

I thought that's what it meant. It is storage heaters, so in terms of physically switching them on or off then that doesn't happen probably twice a year!! However, when they are on during the night, i don't think current is flowing all the time for 7 hours whilst its charging up. they are...

constant switching on load, could you explain please?

I have lost count of the amount of times I replaced Tenby FCU's. I replace them with MK's...anyway; tell me, when they fail I always carry out a post mortem on all FCU's, and one common fault they are all victims of and that is -not sure on the anatomical names for parts in an FCU - the two...

pull cord's been off for a while now so went out and bought a new fitting. The new fitting has L2 terminal at top left. Top right is an empty terminal. The next one bottom right has COM on it. Now on the old fitting it has the live going into COM and neutral going into 1 WAY. Confusing? Present...

Thank you very much prenticeboyofderry..... :D But am now going to ask you another question..... how do i test for continuity,because presumably as you said there is a switch cable there and is not sleeved...many thanks.

i will rephrase that, the diagram appears that the block be taped up but it does also say not tape it up as you do. just wandering what the reason is thats all....i would guess a possible fire hazard.