Search results

I opened a call with Trevi yesterday and they are organising an engineer to come onsite already. I did write an huge email with the results of all the tests as per the instructions so I think that might be why they are moving quickly. The response from technogeek has given me another avenue...

Technogeek: Did you find a resolution. I am experiencing similar issues. The only thing left for me is dismantling the boost cartridge. I am working through the diagnosis stages (all MI instructions followed to the letter). The incoming cold water feed is 2 bar, when tested just before...

I had a response from the customer services today so thought I would post this: I have identified the valve as a Type NN Single Check valve BSP Male 3/4” x BSP Female 3/4” with Chrome Plated body. Data sheet and photos are attached for your information. This has a Part Number : 230020165...

Picasso - the link shows several products which one is suitable for the Trevi boost (this shower needs a low impact chek valve). What about this http://www.fwb.co.uk/?i=711879& ?

I am in the process of installing a Trevi boost shower and there is a requirement for a single check valve on the 22mm hot feed. In the MI there are a list of check valves which are recommended, I cannot find these anywhere. It appears I need a 22mm single swing check valve, please can help me...

that is what I thought, many thanks for quick response. I called Caple customer services and it turns out the sink batch I bought has a known issue where the hole is bigger than usual. They are sending me a new sink kit tomorrow that addresses this issue.

I am fitting a kitchen sink waste kit (Caple CPK4 - see pic) into a Caple Winchester 150 ceramic sink. Please can someone advise how to fit this kit. Should I just use the kit and screw it together or should I be using silicone/some other product as well? The kit does not appear to have...

I need to level out a wall to fit kitchen units as the wall is not level towards to the end of the run (IKEA kitchen units have no service void), there is about 10mm maximum to level. Can I use bonding plaster over the finishing plaster (which is also emulsioned)? A bond finish would be ok as...

Over the weekend I levelled my kitchen floor using Wickes Latex Self Leveling Compound. I had a few issues although the floor is now level. I am concerned that I will have problems with cracking and would appreciate advice before I lay my expensive tiles. Here is what I did: 1) Sub floor...

mnb yes could still do with help

I've dug a channel in the concrete floor across the kitchen floor to facilitate repositioning of the water\waste\gas services- The photo shows the channel (you can also see the old gas pipe): There is about 100mm of concrete overlying the earth and then 10mm of black stuff and then...

I am looking for a reasonable quality oven to install under the kitchen counter below a gas hob. I believe that there is a difference between under counter ovens and normal built in ovens OR maybe the difference is with the gas hob? Please can someone explain to me the difference. I like...

I thought you are allowed to do your own water pipe providing you let the water company connect it to the stop cock in the street. Am I wrong about this?

I've now dug the channel in the concrete floor across the kitchen floor to facilitate repositioning of the water\waste\gas services (a plumber is doing this work). The photo shows the channel (you can also see the old gas pipe): There is about 100mm of concrete overlying the earth and...

I have been looking at the Hep2o flexible plumbing system. They have a method for running pipe in conduit under concrete screeds. Does anyone know how you would insulate this or is the idea that you only use this system where insulation is not necessary. Thanks in advance.

Further to feedback the latest (final) design is: I've managed to get everything to align.