Search results

Can i ask why my other thread was deleted? Alarm posted some stuff for me to check and now i cant because its been deleted

I bought the system in august 2011 Would the battery be a problem already? Regarding the pcb if it is a issue i can get that replaced under warranty

pin had reset to default somehow Had to enter default pin and change it back

Help guys My texecom alarm is not working Iv had issues before with the keypad not working and having to do a powerdown. Had same issue so went to do a powerdown, When i gave it power again it went in arm mode My normal code or engineer code is not doing anything. And the full...

Checked the coolant its ok Its pink I have a feeling it may have not been looked after before i purchased it. Say it was neglected and a service was not done regularly would these symptoms normally be the result? Cheers for the reply's

How would i check the condition of the coolant? Everytime you park up after a drive you can smell the oil

Theres no blue smoke on start up Hmm i guess your right time to trade her in :x

Also forgot to mention it is a 1.2l petrol manual

Hi I have been checking the dipstick. It is always low when the light come on. So have been topping up until it is midway between the level. Will now be monitoring it. However it has happened a few times so definitely a problem If it is bore wear or valve stem seals is it a...

Hi Have a vw polo 9n 52 plate I bought it with 100,000 on the clock Done a full service etc. Now after a month the low oil light came on, I topped up. After 2 weeks it came back on again I have topped up over a litre every time. There are no leaks so i believe it it burning the...

ok thanks Once i do this, Do i have to program anywhere to set it

Hi have a veritas excel. Was wondering if its possible to add a led so i know the alarm has set? Thanks

...

Everything sorted now, Quick powerdown has fixed the communicator, Thanks

Yh i figured that out before, Wasn't possible at the time to have the place empty. Also dialer doesnt accept default programming code. however it does allow me to record a memo etc. Will try a powerdown in the morning as its to late to have the siren going Cheers for the help fellas.

yes Was just doing a quick test,

Yes all PIR's have power Fuses are fine Checked by doing a walk test and it picked up on every sensor so i thought it was ok.

Cant get the alarm to set! When pressing full. Its just beeps and shows the zones were the pir is detecting movement.

Its not a wiring fault as its all working, I think its a manufacturing fault.

Just an update, Had to run two new cables to pir and pa. Now sorted. Now just need to setup the dialer. Theres a problem with the screen though, Its slightly tilted and the top line has a small line going across it. Should i send it back?