Search results

Hello, thanks for the speedy reply. The hot water feed is from a combi fitted about 18 months ago. Before that there was also a combi but I assume the 22mm pipe diamter is left over from We haven't yet cut the hole/s into the bath for the tap/s. The one we got off of ebay is a mono...

We are currently fitting a new suite and have bought some new mixer taps off of ebay. The ebay listing calls the tap a "basin/bath" mixer tap. The taps have two 15mm braided hoses with connectors on which is fine for the basin but the bath has a 22mm pipe on the hot water feed and a 15mm on the...

Hello again, The main 1700mm wall for the bath is now lined with the 18mm ply and as a result is solid. The extra 18mm has however thrown up a problem with the existing shower on the smaller 550mm wall. I know this is not really a tiling question anymore but it might be something you...

Excellent. Thanks for the advice, I'll let you know how I get on. Mark.

Consider my horses held, no to MDF then. I just had a look on Wickes’ website and they do Exterior WBP Plywood Size: 2440 x 1220 x 12mm for £19.99. Will 12mm be thick enough? Should I also use the BAL WP1 Waterproof Shower Kit or is this overkill?? Thanks again for the advice, Mark

Hello Softus, Thanks for the speedy reply. It really is very appreciated. So are you suggesting I need to screw new wooden batons into the wall (on top of the existing plaster board) then screw ply on to that? Or are you saying I need to strip out the existing plaster board and...

Hello, I’m new to this forum and new to tiling so please assume I know nothing when replying!! A month or so ago we noticed a water stain on the kitchen ceiling below where the bathroom is in our house. Removing the bath panel revealed that water had been running down the wall. My first...