Search results

Hello, I would like to fit a fan in the bathroom that only goes off while standing in the shower or the bath. (ceiling) I have looked at all the HUMIDISTAT fans but they are white and bulky, I have looked at the fans with PIR in and they are also quite bulky. I can easily get a...

Ok I have done this and it looks ok now. but I do have some other problems..... and its silicone again! One wall is Black with black grout, and the other wall is white, with white grout. Where they meet I have run a bead of 785 down them... It looks SH*T . I got it all off with...

Hello guys. Bathroom I have some black wall tiles and the ceiling is white, at the top where the tiles are slightly uneven, I will be running a bead of sealant. I have tried using white dow 785 san sealant, masking the tiles, running the soapy finger along gently and then removing the...

Thank you Z Darren

yes always do the google thing first! Looking at a bit of choice, as there will be wood in the room that will also be black... I am looking so a satin black Emulsion, I have seen matt.... in Focus... but no satin. so I would want satin wood easy..... what about the emulsion. Darren

can anyone point me to a link for black emulsion. I cant seem to find anything. Darren

I have always added 10-15% to Dulux trade, it`s well thick. Darren

Zinsser- shellac based! ok is that the only brand? or are there others.. I can olny find stain sealers, and a primer? what about a gloss and a choice of colours? Darren

Could someone advise me the correct paint for painting glass, this would be for a kitchen splashback, and would need to be roller applied . Could you advise, what brand and a stockist please, as I have been looking around and have not come up with a lot, I know that its not just normal stuff...

I have some old paint and sealant, that needs removing from my windows, what is the best stuff for this…without scratching! I have tried with a flat scraper but its not that good. Darren

what was the price? What was the room size in metres example 3x3 was it just skim over the old walls? was there artex? was there lots of corners, new metal edges? Darren

I have always found the same, I have thinned it down, ( the undercoat) and even waited a week.... tiny hairline. I have tried loads of brands of caulk, its the same..... but only with Dulux Trade V Matt. every other paint is ok in the corners., Rich matt, silk...... all ok Darren

I take all of the trade primers and under coat is roller then as well, what is the best undercoat and primer they do? (roller) I also have some Melamine faced doors that I will need to prime, do they do a Melamine primer, or is that an international type brand. Thanks Darren

they are black, so I just wanted to paint the edges, in black. is there a type of sealer to use before a little bit of black tile paint? just for porous edges Darren

Hello, I want to use this with a roller for quite a large area, looking on the side of tin.... do not stir, and brush only... so I went on the Dulux dec site, and looked up wood then satinwood, and it only came up with this...

Hello, I just want to paint some small edges of the tiles, but this part is porous, what would be used to seal this before painting, please Darren

hello, I have purchased one of these http://www.frisco.co.uk/prods/28978.html . I would like to know simple way to fit this, as the fire door is fairly solid, and they are fairly long. its longer than most of the wood drills and chistles I have, so I may need to purchase longer...

Hello I know someone who needs a tiler/ build work, as above, Nice clean work, in Los Giganties, around 57 sq, and refit the bathroom. If anyone has any contacts out there, without silly prices can they mail me please. darrendpb at AOL . com

Thank you, can get some of that wire from a shed... looks an ok idea and cheap. I will be able to push it nice and close with that.... Darren

When fitting lots of downlights, what is the recommended distance of the insulation, Fitting 9 small lights in a small room I can see I am going to have to cut it about a fair bit, is there a method used? Ie is it cut round or just pulled apart.... just standard 12v on a non flammable...