Search results

Here's one I found after a 10 second google hunt. http://www.wjskitchenwarehouse.co.uk/dev43new/Wall-units-900mm-High.html It lists features as: Carcase height is 720mm Supplied with 2 x shelves 18mm Carcase with 8mm back panel clip on off hinges supplied with euro screws pre mounted...

Useful tip, thanks once again.

Okay thanks very much. I will look into this solution. I can ge tthe power cable to the top of the cabs but they are 920 high so they finish a few mm from the ceiling with no service voids (Hello Ikea). I will look at hiding them within the top of the cupboard perhaps. Sorry I couldn't give...

I think he's saying it could overheat? Melt sheathing perhaps?

Hi again riveralt thanks for replying. Its a fused plug, 3 pin. Then cable from this to the transformer, and cable from the transformer to the lights. By fishy smell I assume you mean burning? Or do you mean something smells fishy as in its a cock up? The current lights work by being...

Hi all. Appreciate some advice on this, I haven't been able to find exactly the right answer on other posts. I would like to replace some under cabinet lights I have that are wired to the lighting circuit controlled by one of the three wall switches (single box with three switches...

Thanks again John. I will keep reading up on it and trying to find more details, even if its only to provide a professional with more information. Everyone has been very helpful and I do appreciate your time sO far. Cheers.

Thanks EFL. So you're saying this is one for the pros. A bit disheartening as I thought a simple face plate change and wire but I seem to have uncovered an unknown element. Sorry i cant give better details of the problem but thanks for your help. Also see what you mean about the ring...

Hi, this is a kitchen but I can't give a definite answer on if they powered appliances. The kitchen as it is now was put in 10 years ago by the previous owner. Prior to that maybe appliance were rigged here but the 45A cooker wiring and fused socket for the extractor are on a different wall. The...

No, sorry John, You just beat me in posting time, I wasn't dismissing the above. Thank you both for your replies. The detector I used was a good quality screwdriver type device good to 10,000V. I have a voltmeter if this would be better? The wires definitely all go back up the wall, you...

This is correct, box 3. The "7mm" wire is angled slightly giving the illusion of being 7mm.

Morning! So here are some better pictures. All wiring seems to be the same size, a flattened white oval shape about 10mm across. Box 1 Box 2 Box 3 Measure All wires go up the wall behind each socket and into the ceiling. Using a voltage detector, boxes 2 & 3 are...

No, but i will find out. Apologies, I appreciate your help but I'm obviously not providing enough information so I will take some more pictures tomorrow morning with sizes. I don't think it's for a kitchen appliance as the wiring for the electric cooker and extractor hood are on a different...

Thanks efl, I'll try to find out. Thanks owain also. This is a kitchen and these sockets are level with the other wall sockets that are on the adjoining wall, normal above counter sockets. They were hidden behind a floor to ceiling cupboard, just blanked off by a previous owner. I've since...

Thanks very much. What could the yellow and blues be attached to? A switch of some kind? There is nothing else in the vicinity except a double socket 3 feet below but I think this is wired separately. I will see if I can tell where they go to. If it's not possible is it time to call in...

Hello gents I would appreciate advice on this please. I have three single blanking plates behind where a cupboard used to stand. My plan was remove the blanking plates and attach new wall plates to each box. This is what was behind each plate: Box 1 has 2 earth wires, 2 red...