Search results

I changed it the bits because it was leaking from the castle looking nut , it doesn't leak now . It just makes a momentary squeek when I turn on the hot water ( the squeek developed a couple of months after I changed the bits )

It looked too complicated and it wasn't leaking from that end , so I left it alone

I recently changed the big diaphragm and spring in the circular casing + the large castle shaped nut behind it and the plunger that was inside

What would you charge to service it ?

Hi I was just wondering if you can refurbish a diverter valve on a baxi 105e without taking it out of the boiler ?. My valve is working ok but makes a momentary squeek when I turn on the hot water so I may have troubles at some point . Mic

This might sound stupid but sometimes tiny leaks just stop

I'm probably totally wrong here as I'm not an expert like you guys but here goes . Wouldn't it be a waste of money buying a magnafilter for a 15 year old boiler when it must be coming to the end of its life + most new boilers come with filter offers . The second reason ,I'm thinking it may not...

I believe you can just squirt fernox express into your filling loop

Hi my combi boiler used to produce hot water in about 10 seconds when it was new 15 years ago . It now takes nearly 20 seconds before the water is coming through hot , is this something that can be fixed or is it just because it's getting old ?

Would the autovent eventually get the air out by itself ?

Sorry to be so much trouble but I have one more question . My pump is much better than it was but still slightly noisey . The gas engineer at work suggested I take the pump screw out completely to get all the air out ! . I'm assuming this would be madness as water would fly everywhere , am I...

It gets hot if I run the belt with the cutting deck removed

Had the mower on the ramp , all pulley's are good and nothing touching the belt . Is it possible that it's running hot because it's a new belt ? Or is that not possible

It drives the pulley that drives the cutting deck

https://www.worldofmowers.co.uk/stiga-spare-parts/stiga-front-mowers/base-machine/2016/stiga-park-540-dpx-2f6236281/power-take-off-2 that's the belt in question

Yes it's 4wd , I was thinking they could of sent me the wrong belt . I'm sure I got it on the correct side of the tensioner . It's only 2 years old but how do I check the magnetic clutch ?

Thanks for your reply John it's stiga park 540 dpx . It's the pto drive belt and it was unusually hard to put it on , like you said it's usually easy

Hi I know this isn't a car but hopefully someone can help . My ride on lawnmower recently had a v belt fly apart . I ordered the new belt and fitted it , it was tight to fit . When I start the cutting deck I can smell the belt getting hot + it's hot to touch after 2 minutes of use . Any idea...

1 last thing , just noticed my pressure gauge has dropped 0.2 bar over night since replacing the parts and refilling the boiler. There is no visible leaks anywhere , could this just be trapped air escaping ?

Thanks sorted