Search results

I need to move my electric meter and was wondering if an electrician can move it or does it have to be moved by the electricity supplier.

Do lowered joists for the loft have to hang from the party walls or can they be installed the other way (from front to rear of house).

I am looking for a bath with no slopes.

Where can I buy a 1500mm bath with a no slope end from?

Do the gussets have to be nailed or can they be screwed into the joists and rafters. Also how thick should the plywood be?

What would be a suitable way to tie the roof rafters to a lowered first floor ceiling to prevent roof spread.

I have a velux centre hinge window which only opens about 2 inches. Any ideas what could be wrong.

Would I need party wall agreements to lower my first floor ceilings.

Would there be a problem with regards to building regs if I wanted to move my boiler next to the window wall. Marked on the picture with a red tick.

I want to convert my loft into an office/bedroom. At the moment height is about 1.8m.

I want to lower my first floor ceiling to get extra height in the loft but how would I suitably tie the new floor to the roof structure to prevent the roof spreading.

I have a Triton t80si electric shower and this morning it stopped working. The power light is on the shower but only cold water trickles out of it. Does anyone what could be wrong with it.

Yeah seems like to me that it is my water supply pipe but with one pipe coming at the outbuilding and other incoming from the ground under my kitchen sink.

The main water pipe going to the wc and tap is not coming from the house, it is coming straight out of the ground. Does this require bonding?

There is electricity coming from a 13a socket inside the house which is going to the light bulb inside the outbuilding. No plastic pipes. Main water pipe coming out of the ground is not bonded.

I have a wc outside in the garden outbuilding and want to know if the copper pipes for the tap and to the wc need earth bonding.

The shower is a MX Options Solo QI. I have checked the power inside the shower with a tester and there is power going to it. When i turn the knob on the shower nothing happens ie no water comes out.

I have an electric shower which isnt working. I have checked power to the shower and all power to it is fine. Any solutions to what might be wrong with it.

The banging is there even when no water is being used.

Will a pressure reducing valve near the main stop tap get rid of water hammer Becucause i don't know which pipe is making the banging noise every few minutes.