Search results

ok thanks....but is it needed to pass building regs m8?

is there need for special paint or will normal undercoat and gloss do?or varnish thanks mark

anywhere else u know of?

hi do`s any1 know where i can order some proper fire door frames online,the ones which are pre routered for the intrumiscent strip cheers mark

so going off that masona,the distance between cill and gutter is variable so aslong as it`s more than 600mm from floor its ok. thanks to everyone,reliable as ever cheers mark

sorted the stairs problem i think whats the lowest a roof window can be to gutter?

u know the minimum distance markie? i knew the max was 1700mm

hi need some advice thanks is there any minimum distance a roof window can be from the eaves? i was told off my building inspector that i could put another window in aslong as cill was no lower than 2`(600mm) from floor,but he never mentioned the distance to the eaves outside

well 10 inches is a bit low aint it, come on people HHHHHEEEEEEEEELLLLLLPPPPPPPPPP please.

i`ve just had the building inspector round to see where i`m upto... :cry: 2 major problems now the main one is the height of the MOE windows and distance from the bottom of window to end of the eaves.the window is to high from the floor and too far from the eaves end. He advised me to...

is it possible to run a spur from a double socket to power a light fitting? i`m in process of doing kids bedroom up and plasterboarding understairs of lost stairs but it`ll be very dark as there is no light.there is however a double socket in there.so could i take spur from that for a light...

ok think i`ve got that from hot on heater straight to hot tap from mains,isolation valve,a filter/strainer, a Pressure Reducing Valve with a check valve (internal) and a pressure gauge, and finally an expansion vessel which fits onto the tee connection. do`s the other end of the T go to the...

yeah it can go through wall same as toilet waste pipe

any1 willing to give me advise on this,to stop the girlfriend moaning about not having a finished bathroom. i know where its going and connecting it to a fused spur,but the pipe connecting just needs explaining please or a diagram would be great

second hand off ebay with no instructions

hi all,i need help to install a ariston undersink water heater 15L 3K...i`m installing it in loft to feed en-suite basin hot water tap in converted loft. i am currently taking cold water for shower toilet and basin cold tap from mains,all fed to via plastic push fit fittings.heres the pics what...

i guess i`ll earth i`ll get the saw out and earth strip it for peace of mind,will stillbe in ceiling void though as there nowhere else for it.

how important is it to sleeve the earths in a junction box as i can`t be sure whether i did so before i enclosed in loft ceiling void(doh) ...should i get the saw back out to cut another hole to access it

haha cheers m8