Search results

Have you balanced the radiators yet? When you say balance do you mean open and close inlets and outslets to gain optimum flow - is there a set procedure for this as i can see this being a pain. Is there air in the system? When you bleed a rad, what colour is the water? yes the water is...

anyone?

2 of my 3 down stairs rads struggle to get hot (some days they get hot, some days they get warm and some they remain cold) My thoughts are to remove these 2 problem rads and rinse through to remove any sludge ect if this doen't make any difference i thinking of using some of the sentinal...

done it Many thanks Chris :D

many thanks for advice the cap is very stiff is there a knack of undoing it? cheers

HI I need to remove the radiator in the bathroom. It has only has a valve on 1 side of the rad. I have not removed this type before can someone please explain what i need to do. I have turned the white cap to the off position do i need to do anything under the copper cap. Also if i do need...

thanks jo what is the likelihood of an airlock and how would i connect mains to a hot tap and back fill? jase

thanks for speedy reply have looked for the valves and found 2 in airing cupboard and 1 near the cold tank in the loft. the 2 in airing cupboard air very stiff (scared of breaking them) if i do it the way i described above should this be ok even though i have extra valves thanks jase

Am soon going to tackle bathroom and gathering all relevent info as it comes to me before i start. Shutting of water supply can i check the procedure 1 turn off main inlet (under Kitchen sink) 2 open all cold taps until run dry 3 open hot taps until runs dry 4 system now empty taps ect can...

I know this question has been asked a million time but i confirm the procedure - I am laying ceramic tiles in the bathroom Is it best remove floorboards and replace with 18MM wbp or put a thinner WBP over the existing floorboards, I dont really want to raise the floor much problems with...