Search results

The 24i dosen't have a plate h/ex. The only other reason could be the filling loop letting by as has been said. Not being confused with the Junior is it?

There's an o ring where the spindle passes through. Change the o ring and make sure the spindles not dirty/damaged.

I've been informed by an electrican that if I extend or add a circuit to my existing ring main that I need to upgrade my consumer unit to RCD. It currently has a Memera MCB unit(about 20 yrs old). Still has a couple of blank outlets as well. Is that right?

I thought they'd stopped producing it.

Sounds like a sensor fault now.

Remove the switch from the pump ch/pump flow switch and push in and out with pliers (being careful not to scratch it). The spindles can get dirty and not move smoothly. You might also find the pump might be weak.

Agreed. There are 2 pcbs available for this model so make sure you get the serial number befor ordering.

Had the same problem this week on a Baxi 105e. It was the pcb. Worked ok till it reached temperature and then when it tried to relight the power to the fan was intermittent and the flue/fan light started to flash.

Same boiler as a Britony Combi. As said, sensor/flow switch regular faults on these but does sound like a pcb problem. But it is very intermittent so you might have to live with it :)

There is dirt in the water pressure sensor. It needs taking out and cleaning. A common fault on this model. Get yourself a gas engineer.

If they've connected it to the same water main in the road it should still be 5 bar. Working pressure or standing pressure?

Any guys with dual registration left of their own accord round my way. Not heard of anyone being sacked.

A faulty PCB on this appliance can cause overheating. They just fail to switch off.

Because sealed systems require an overheat stat. Don't think Mk2 Flamingos had them.

And don't forget the overheat stat!!!

Had this problem with a few mf's. Normally the pcb.

A lot further south than you. Why has it been cancelled? Much more expensive to get contractors in.

Not round my way. Were 10000 behind :shock: , unlikely to be cancelled.

No.