Search results

I don't think I've tried that one, if you start the shower without the pump, you get a drip, I'm sure nothing happens if you switch the pump on. I did flush through the feed pipes after install into a bucket and thinking about it the flow was very good?! Latest development is if you wobble...

Thanks for reply. Pipes are running along loft floor, so deffo all well below tank. There could be air, but when it runs, it's runs fine. There is a secondary feed off the hot tank, which I used, I have heard some rumours that this isn't a good idea, I can't work out why tho. The pump does...

hi all, I hope someone could help me with this as it's got me stumped and the only thing left is to try random things to try and sort it, which I don't want to to...customers getting annoyed too. House has had new bathroom fitted by us, old bathroom had gravity shower via a (aqualisa, I...

I was thinking that at the time..... Could I just slide it back in and it would plug itself back in..! I didn't...

That reminds me, I've pulled a dishwasher out before and it's pulled the plug out the socket where it was stuck to the back of the dish washer!

Spade bit or I use auger bits. Can't remember the size, 25mm rings a bell, you will need to measure the od of the pipe.

Yeah sounds fine, just use a sharp bit. You will have to make sure the holes are lined up and straight, 22 copper is very unforgiving. Never use copper for hidden anymore, sad but true. Easier quicker.

I'd go with your last statement.. The tiles will chip on the edges with a wet cut.

I'm no boiler expert but I'm sure the boiler should kick in before 27o. Anyway... You must have a blockage...next step is to take a cold rad off and see of you can get a flow from the valves.

So what happens when you do this?

I agree with this... How can the system have been correctly balanced if half the rads aren't working...?!

Clear silicone

I'm forgetting myself because technically it will be Spurs off a spur. So fcu it is then.

Isn't there something in the regs about a max 2kw off a spur for a fixed applicance, summer houses falling under this?

hi all, Outside summer house for small gym. Couple sockets, light. Need power, 40/50m approx cable run from back of socket, 100m to cu. 1st option is fcu off back of socket via armoured but limited to 13a, borderline acceptable. What's the probable max load you could run off back of socket...

Time, care and experience.

Whole house is zoned, with all rooms with own stats. Whole upstairs must be done the same way. Customers not complaining but hasn't been there long.(months)

Your old stairs have beading, your new does not. If you got some wide beading, would this not achieve the same thing?

Plastic or copper pipe? Because I've seen a 'ring' of crud on the end of copper pipe on push fits, which could make it difficult to remove.

Image by xr4x4 posted 4 Nov 2015 at 9:07 PM Grey pipe.