Search results

Hi i have bought replacement doors for my kitchen units, however, ther are 15mm too small compared to my existing carcases. Can i cut the 15 mm off the sides of the carcases at highest point, then replace with the top covering, and fit the new doors?

cheers, like you said, most bubbles went back in as paint dried

i hung lining paper then painted over it, a few bubbles have appeared, is there a cure for this?

many thanks big all!

does this battery ryobi Model - BPR-181 fit the one plus system? i have one plus drill with battery model BPP-1815, but looks exact same as the aore mentioned and both 18volts, would the batteries be interchangeable?

luckily, insurance covered me for lost keys to get a lock smith and new lock fitted, so i ahem, lost my keys and job done!

Hi, the mortice lock on my font door has broken in the locked position, the key wont unlock it, is there anyway i can remove it without having to call in a lock smith? I can access it from the indoor side, is there a method of removal?

does anyone know where i can get a guide for straight cuts using a bosch jigsaw? know these exist, you attach them to the jigsaw and they hold the side of the wood being cut so it goes in a straight line, any help??

Got 18v ryobi one plus collection combi drill and impact drill with two batteries, charger and hard case at B&Q in sale for £70!! they retail in screwfix for £130. Dont know if all B&Q's doing it but would imagine so, great bargain, so good i bought two of them!!

what the ryobi one stuff like? seen they do jigsaws and stuff on the 18v batteries, never tried a cordless jigsaw, any one got opinions on them?

so the 18v bosch is capable of doing the drilling into brick and massonary? or should i go for the corded? thing is i can get the battery one at £50 but have normal battery drill at moment, not the hammer action one so wanted to know whther an 18v hammer action would would be better than the...

sorry should actually be the 18v bosch drill, will that still do the job or would the 650w one outperform it?

loking for a basic model for drilling into bricks for putting up shelves and diy, which would be best model http://www.amazon.co.uk/Bosch-Electronic-Cordless-Hammer-Driver/dp/B0006D3PNA or http://screwfix.com/app/sfd/cat/pro.jsp?cId=101376&ts=67996&id=38286 What kind of voltage are...

are sds and sds+ the same drill bits or are they different like sds max?

so do all sds drills not do chisselling?

can anyone tell me if this: http://www.tooled-up.com/Artwork/ProdPDF/ERH-650VMaster.pdf chissels and is it any good?

Can you lay laminate flooring on top of normal carpet underlay? sure i heard this somewhere, especially good for upsatirs rooms as deadens noise of walking around the flooring

Just took off the wallpaper in my flat and the walls are the best underneath, lots of thin cracks, some lumps of plaster out and some thick layers of what appears to be gloss paint on the walls flacking off in varrying stages, what do you think would be best, filling in the missing lumps and rub...

thanks, isolating valves will go on once ive traced the water main later

Hi i want to fit new kitchen sink, there are no valves on the pipes going to the taps at present meaning i have to turn the water off at the main, I have a combi heating system, would i be right in thinking that if i turn off the cold water supply going into the combi then run both taps this is...