Search results

Ok so I have replaced my tap with a new one from Insinkerator , there isn't any screw holes so you can't get into the tap to dismantle it , I took the tap handles off but you need a special tool to get the cartridge out. So it looks like the new tap was required and could net be repaired. Took...

Mine was 8 years old , how old is yours , I saved £100 by using the promo code

I spoke to Insinkerator support who said it's an internal failing and cannot be repaired , needs replacing. They did send a 20% off promo code to help.

Checked and no hole for any Allen key , do you have to take the hot and cold handles off ?

I cannot see how to remove the spout , the base looks solid

Hi All As title, Insinkerator 3n1 tap is leaking where the cylinder of the tap goes into the main tap see photo , question is can it be repaired if not do I have to use a Insinkerator tap can I buy another hot water tap Thanks

Electrician cut out letter box shape in the ceiling and I have filled in with Easyfill , so after I have rubbed it down do I just paint over it or do I give a coat of Zinnser 123 first ? Thanks

I am after putting my washer and dryer in a unit stacked on top of each other, Is it possible to buy a ready made tall unit to put them and where to buy therm from. thanks

Hi All I have a Eco Tec plus 615 fitted at home that runs 15 radiators inc 3 large column ones in the Kitchen/Dining room. I have been told it's underpowered for 15 rads as its only 15Kwh is that right and ion so what size do I need please. Thanks

Hi, cartridge is 4 months old , not tried alignment as to cleaning how do I do that ? thanks

Yes tried that 3 times but no better

How do you clean them I’ve used the utility tool to clean them but it’s not worked

When printing I get lines missing in the middle of the print. I have used the utility to clean the print heads but I still get the problem, see print any ideas how to fix this please

I was going to connect into existing...

I will be stacking washer dryer soon and wondering if I can just fit an extender pipe from the dryer to the connection under the sink , any reason it won't work ok Thanks

a couple of doors a year old are sticking in the top third , I want to tighten up the screws but they won't as they turn when tightened, what size long screws should I buy to try to tighten everything up thanks

Thanks I bought an extension kit and the drain hose fits into the extension kit and I can then tighten up the connection

Hi I looked at that but its too big as the condenser drain pipe is outer 11mm inner 7mm , thats 19-21 for a washer pipe

Thanks but is this hose I need but longer - https://www.ransomspares.co.uk/parts/brands/bosch/tumble-dryers/wte84106gb__47/water-drain-hose-kit-2m/54111.htm

Hi All I want to move my tumble dryer but the existing condensate pipe isn't quite long enough. How long is the existing one ? as I can only see 2m ones for sale Can you buy 2.5m condensate pipes or is there a way to connect the old one to a new one. many thanks