Search results

Elite 24

sorry to hijack the thread, thought better ask here rather then create a new thread. is there any way to Arm without waiting to close the door? This is in case I forget to arm and decide do it later from the mobile app?

is it usually 8 core or 6 core cable ?

thanks secureiam! Where can I find network fuse, is it inside the panel or keypad? Also alarm is on a separate RCD circuit so I would expect RCD to switch off in case of any potential shortage . In case of cable replacement can I just cut out the part which may be damaged and replace it or...

Hi guys your help needed please. Carpet fitters put a carpet gripper on top of some alarm wire while fitting and alarm went off, keypad is dead now. No visible damage on the wire outside but I am suspecting one of small cores inside may have been damaged. I suspect this is wire to keypad but...

It's a part of a ring in the new built extension, just realised that I need a towel rail there after all electrics has been done and walls plastered. The other option would be just to plug radiator into the socket, isn;t it?

ok thanks again John, all clear now.

I guess this was yes to a cable from socket ....

I am considering fitting an electric towel rail in Utility room would it be possible to run a cable from a socket nearby to a switched spur and to a rail or does it have to be on a separate RCD circuit from CU?

ok thanks very much, will try that !

Hi thanks for quick response. It's Texecom Premier Elite with three leds, like this one but appears there different models looking all the same on the outside so will have to open it and take a picture. However I recall that spring didn't come off as it did on the the others.

Also wondering this never happened before when we moved other sensors, maybe PIR or wire got damaged/broken when I moved it and has to be replaced?

Cannot set alarm as it says landing PIR tamper. This happened after I had to open and move it away for painting. I put it in Engineer mode before moving this PIR, but now when setting alarm on there is a bip then I get mssg Landing PIR tamper and after that Contact Alarm Co. Hoping it can be...

We have suspended timber floor, ground level, builders using 75mm kingspan insulation and triple aluminium heat spreaders for UFH, future floor finish is engineered wood or possibly laminate. Is it ok to use T&G chipboards on top of UFH or will this block heat ? If so what are suggested...

thanks for your comments guys! I connected Isolator, and 2 way Labgear splitter to existing VM BB cable. Webro HD100 cable runs now from the splitter - one leg to VM TiVo box and another to router, all works well. Ping and broadband speed the same, TiVo seems to work well too.

Ok, finally managed to get hold of the guy, they should come on Thursday to sort it out and fit more PIR's (my own). Secureiam, thanks very much for saving me from ruining my alarm system by doing poor DYI ... will also ask them to set-up panel so that it can notifications via IP com /...

Not as simple as I thought. By power down panel you mean disconnect battery as well as mains? I will try to contact my installer again but would very much appreciate any help from members here, I am in Eltham, SE9.

Hi again, contacted my alarm company several times, was told lead engineer would call me back but he didn't ... Not happy at all but don;t have much time now panel is in the way now after wal has been removed, so has to be relocated in a cupboard about 1.5m away... Seems power cable and...

Doing extension and need to move Virgin Media cable to a new room while everything is open. Problem is that only way to move/extend cable which is connected to VM box is to run it under floor but not possible to do without lifting floor boards which is not an option as that room is not going to...

Thanks Dan, now it makes sense why thermostat may be required. That pump looks cool and seem to have both timer and thermostat but 330 quid for a pump is too much for me. I already acquired Grundfos UPS 15-50N for £90... Do you know if there is a simple thermostat which could be connected...