Search results

Yes Bourbon, the old glue is completely removed. The bits are very clean and dry. Thanks for getting in touch.

Sounds possible and I will weigh up if this is possible. Just a bit worried about tapping the pins in to other bits surrounding the affected areas in case I knock those off too. Again, Many Thanks for your help and I appreciate you taking the time to help out.

mmmmm? A device for tightening a rope or cable by twisting it using a stick as a lever!.......I'll have to have a look into that too! -Many Thanks again.

That's good to know JobAndKnock and I'll look into that. The main proviso' is the fact that I can't use a clamp and therefore something that is fast setting would be ideal. Many Thanks -Appreciated!

Thanks for that. Yes, I'll check out the Araldite website. Cheers again.

Cheers for that.

Hi There, On a couple of occasions I've used wood glues to affix small wooden decor bits that have fallen off an old wooden wall clock not long after it came into my possession from a place where it had hung for decades, but they are not staying on (some are 6 inches or so long}. It is...

Thanks all for the useful information. After sanding off the paint at the knot sites, I was pleasantly surprised to find that the Zinsser B-I-N paint treatment was 'white' (for some reason I expected it to be a Brown solution) and it was great to apply. Again, Many Thanks.

That's very useful to know, ta very much

That's really useful! Many Thanks for all that

That's Great! Many Thanks

Hi There, I've just rubbed down the paintwork where stains. were appearing on fairly new skirting board and they are on knots in the wood. The skirting was initially primed and undercoated etc, but stains are appearing. What is the best form of treatment please, before I paint again. Thanks very...

Hi Pilsbury, Got my Lean-to finished a month or so ago.....I hope you have had good progress with yours mate!

Finito

Thanks very much for all your replies. I left it for a couple of weeks and then went away for hols. On returning, I did have to brush the surface again to get rid of sand, but there became less to sweep away and then eventually gave it a couple of applications of PVA which done the trick. A...

Hi There, Hope you can help. I've had a top layer of concrete laid four days ago and it seems good except that it has a gritty texture to the surface when walking on it and when it's lightly rubbed, it produces a slight sandy feel and granular. My wife is wanting to get covering onto it as soon...

Thanks Nige F, ...I'm onto something near to the Bartol Gutter dimensions -so will have a look when I get my hands on it. Cheers again, Keith

Hi There, I'm hoping to merge the guttering of my new Lean-to Extension into an existing gutter at right angles to it. The existing gutter is 'Bartol High Capacity124mm x 76.5mm' and I do have a spare length of it -to utilise but cannot find a similar supplier for a right angle (90 degree)...

Ha, nearly 70 but still playing in a Rock Band!! Yes, I don't know how I'd have done all that if I was still working. In your case it will be harder for you...but you will get there. Just look back -on when you started and Remember to take lot's of Photograph's.