Search results

Hi all, as above on a Vauxhall Omega Elite V6 1999 V plate. Taken out six screws around the edges but now stuck have looked for a Haynes manual but they all seem to stop at T reg would this be ok? Your thoughts on this appreciated, thanks for your time!!

Hi all, what type of paint do you use on a bumper repair from cans, thanks for your time!!

Hi all, have a Honda accord 2.2 1994, need a new Ignition Module, is this within the realms of a DIYer, have done a fair bit of repairs in the past, and have been told it necessary to remove the distributer but don't want to mess up the timing, your thoughts and assistance on this would be...

Hi all, mobile phone been in washing machine for 10 mins, your advice greatly appreciated, thanks for you time!

Hi all, have some dry lining to do, have PVA the walls because of different textures, my question is how long approx will it stay workable. Thanks for your time!!

Hi all, the wife has bought a slim shower tray, my questions are as it had no instructions, we have wooden floor boards and I am thinking of putting a marine type ply screwed to existing floor only under the tray, and what will be the best way of bedding the tray in, gripfill, sand and cement or...

Hi all, my friend has had her emails hacked and blocked, can anyone explain the procedure to sort this problem, thanks for your time![/b]

Hi all, looking to buy some down lighters which come supplied with 50watt gu10 bulbs connected to the mains, my question is can I use gu10 led's say 10watt instead, thanks for your time!

Hi all, hope this is in right place. Had to replace my tower but kept my old printer which is a HP deskjet 1050A all in one, J410 series which is connected to my tower via a usb. The problem is that I have mislaid the disc that came with it to download onto my computer. what can I do to rectify...

Hi thanks for your reply, the light will be no more than 3mtrs away, the cable will be fixed to brickwork and timber of the pergola.

Hi all, already have external switched socket in garden off armoured cable, my question is what cable should I use to the light and should the cable be in conduit, thanks for your time!

Hi all, want to put a security light outside, cable partly above and below ground, power will come from conservatory. I assume all cable has to be armoured, your thoughts on this please, thanks for our time!

Hi all, had a computer built nothing special just a bog standard one about 18 months ago. New to computers no one told me not to turn off on power button on tower and consequentlly the hard drive is u/s. Been to shops and they quote £200, I. Can nearly buy a new one for this price. Your...

Hi all need fit a new reversing light to the rear of my car, my question is is there a minimum height it needs to be, thanks for your time!

Hi all, have a working open fire, my question is can anyone recommend a coal that works well with logs, I know home fire is a good one but is so expensive, thanks for your time.

Hi all, can you recommend a good fast setting adhesive for flat packs, thanks for your time.

Hi all, have made a front gate 45" w x 40" h, out of close board fence I had left over and have beefed it up a bit with 4" x 1" rails and an angled support, what size T hinges would I need, thanks for your time!!

Hi all, have a small dent in car which I have tried to push out, but because of where it is it's pretty much impossible for an armature fix, so am going to fill and paint. My question is, the paintwork is not damaged in any way so do I have to remove paint from inside the dent before I can fill...

Hi Nozzle, thanks for your reply. Yes it is a smooth finish, also looking for recommendations for makes of paint in spray cans!

Hi, as above, has anyone used spray cans for this job if so, was if successful, and what make did you use, thanks for your time!!