Search results

Thanks for all the replies. Sounds like what I suspected. There's someone else going round tomorrow to assess it so hopefully they'll either confirm or give him a cheaper guaranteed solution!!!

A friend of mine mentioned that he was having problems with his boiler making lots of noise. He bled the air from his rads, ensured there was no blockage in the header tank etc but still had the noise. He then drained the system and even removed every rad and flushed threw with clean water...

I've experienced similar things with my windows and other glass items. Frequently heard a load bang then noticed the talc print of a bird in flight on the outside of the window. However, one day I heard the bang then noticed a big crack across the inside pane. After taking the d/g unit out...

I don't know the answer to your question regarding grade, but from another point of view...If you were to suffer a break-in from the conservatory via the 'internal' doors, it would give the Insurance company a simple get out clause, and you know they don't need much. Therefore, with that in...

Cheers Big-all but the one thing I do know for sure is that the credit card company are jointly liable for a breach of contract with the retailer under Section 75 of the Consumer Credit Act 1974, provided more that £100 (but less that £30k) was paid on a credit card. Whether this constitutes...

Thanks for the comments. They all say what I was thinking so I'll definitely wait untill I have the certificate before parting with my cash. I thought the credit card payment may be my 'guarantee', so I'm pleased I was able to put down the deposit on the card in the first place. And...

I guess this question would be more suitable to a legal site but I’m hoping that someone may have had the same experience or have a bit of trade knowledge and be able to advise. I had some windows replaced on Day 1 and Day 2. On Day 2 the fitters realised they were missing some of the...

glreece I've got a manual so can probably help but can you confirm what you want to do. Change the zone text on the key pad?

Fjon In answer to your original post. You need to link out the PA connections at the panel. They are in the bottom right hand corner of the panel marked PA. Once that's done, if you're still getting problems then do the NVM reset. either use the jumper suplied or just connect the...

joe-90 you cracked it! Did a factory reset, powered up and ....silence...system disarmed. Went into Engineers menu with defaults and exited (as must go to work now). Right, hopefully I'll be okay now, although I do have to reconnect a few things again. But at least if it goes wrong...

No my instruction manual goes straight from wiring diagrams to programming. But nothing along the lines of "you'll hear some beeps, do this that and the other"

Connected battery, and straight away alarm started and PIR lit etc. ie same as before. Connected mains as well and still the same. So still no joy.

Joe-90 If it does clearly say that and it proves to be the problem then I apologise for wasting peoples time. But I've had a look and I can't see where it says it MUST be powered, what page is that on? I can see where it goes to the trouble of saying unused zones MUST be linked out but...

Hello Breezer I've tried both codes but with no luck. Also, disconnected all but 1 RKP and still the same.

Hello All Really grateful if someone could help me out. I’ve bought the Sterling 10 Alarm system, 2 LCD RKPs, Door Contacts, Belle, and 4 PIRs. I’ve been installing piecemeal other the past few evenings. After the electrics and control box were installed I connected the first RKP and...

Thanks for the replies. Looks like I'll go with Woody's advice. Cheers

Hello all, this may seem like a crazy post but I just want a quick bit of advice. I arranged some building works for some elderly relatives and the building is nearly complete. Me and my family have all been very pleased with the builders, tidy, helpful, considerate and hard working. In...

Thanks for the reply wms Your posts have certainly been useful for me and hopefully they will be for others too. In respect of the current 'issues'. The fitters have agreed to sort them out and acknowledged that it was just a case of getting them in and weather proof over the weekend with...

Many thanks for the replies. Sounds like I should see how things go tomorrow once I bring these things to their attention. wms No worries about the long reply, I really appreciate you taking the time to do it. The weld is fine, by that I mean complete, on the outside, it's just the inside...

Hello All Grateful for any advice on the following situation. Just had some new windows fitted. I noticed today after the fitters had left that on one of the frames... 1. Two of the plastic welded corners have a slight split in them. 2. One side of the opening windows has...