Search results

  1. O

    Jointing

    Its a theoretical question only, just interested in ways to do things should the need ever come. I know all about resin joints etc just wanted to know of other ways. There is NO cable to joint this is only a question. Thanks
  2. O

    Jointing

    Hi, is there any other way of jointing an armored cable below ground? can you use out door glands in to a plastic box then fill with resin? Just a question. Thanks
  3. O

    Supply To Poultry Shed

    HA HA HA, Do one fella.
  4. O

    Supply To Poultry Shed

    Ha ha, you really have some spare time on your hands dont you? do you want to fins some of my other posts and update them too? Some people.......
  5. O

    TT RCD

    buisinessmen? I am not any form of buisiness! Private land, private house and all i wanted was advice. Enough said now as the job is now done. Thanks for all your replies.
  6. O

    TT RCD

    What difference does it make what other posts I have made on the forum... this is a new question! Answer it or dont answer it, up to you.
  7. O

    TT RCD

    Yes, All RCBOs exept one MCB. So I can do away with the RCD? I was told that I would need a 100 or 300ma RCD to protect from fire?
  8. O

    TT RCD

    The house has all RCBOs and the circuit in question is just an MCB
  9. O

    TT RCD

    I was advised that I should not export the earth from my house and to TT it at the shed. Plastic water pipes and timber frame.
  10. O

    TT RCD

    From the house there is a 10mm twin and earth coming from our CU via a 50a MCB, this goes in to a sarel plastic enclosure (all this was there when we moved in) From there we needed a run 60m away to our large shed to supply sockets and lights. We ran this in 2 core armoured protected by a...
  11. O

    TT RCD

    Sorry but I should have said from the start this is a question about a TT'd shed from a TN-C-S Supplied house. 16mm 2 core XLPE feed.
  12. O

    TT RCD

    It was the main switch but I was going to replace it with a 100A isolator.
  13. O

    TT RCD

    If you are using all 30ma RCBOs in a TT install can you do away with the 100ma/300ma main RCD?
  14. O

    Earth Loop

    The transformer is across the road from me, I guessed the PME bit because the earth cable comes from the side of the service head. Could I be wrong?
  15. O

    Earth Loop

    sorry for the late reply, I asked him again and he said on the ring final he got 0.60 ohms (fine) then when he removed the consumer unit cover and tested the main earth to live/neutral (earth removed from CU to prevent any crossovers etc) he got 0.14 ohms he said that was bad for PME and...
  16. O

    Earth Loop

    A friend of mine came to fit a new double socket for me and while he was here did a earth loop test, it came back at 0.16 and he said that was bad... I thought the lower the better?
  17. O

    Question For The DNO Guys

    Thanks for your replies, is there any particular reason there is a 70mm cable coming down the field and then jointed to a 16/25mm?
  18. O

    Question For The DNO Guys

    Hi, About 7 years ago we had a brand new three phase supply to our coffee shop and until now we have never seen it as the cables etc were covered by stone (stone covered duct) Im just a bit puzzled by what we have... There is a cable coming from the road and it says on the sheath (3 x...
  19. O

    Cooker Connection

    but that would be nearly 10KW on a 6mm twin and earth.... surely thats too much? TLC website says 10mm cable
  20. O

    Cooker Connection

    Hi, My hob has packed up and need a new one until we get a new kitchen. The hob im looking at takes 7KW and we have an electric oven taking about 2700w. Would these both be ok on a 6mm twin and earth protected by a 32A mcb? Thanks
Back
Top