Search results

Hi folks, To save running an additional cable to the external of the house, drilling another hole through the wall etc I was wondering if it's possible and safe to run 2 different PIR Floodlights from 1 fused Spur, in essence running a junction in-line from the house via an IP rated junction...

Hi folks, We have recently purchased a fairly old house (1906), and have high chamfered square skirting boards: I was wondering if anyone knows where I may find a suitable off the shelf replacement or can recommend a company that may do a custom style for us? Thanks in advance

Hi folks, We recently moved into our first home, we were advised that one of the original chimney breasts had been taken out from downstairs to the loft - it has been inspected and has been certified as safe in the loft space and correctly supported. However, for whatever reason (they stated...

Hi John, Appreciate the reply, unfortunately theres literally just two sheets laid across the frame with a middle strut going across, I could possibly get behind the boarding and put in some additional framework I guess. Current ply is around 12mm Thanks

hi folks I have recently bought our first house, an old Victorian house with a 36m2 living roomer/diner. In the front of the living room stands a “fake” studded chimney stack, there used to be a chimney here but then they decided to knock it out from the ground up and then supported correctly...

Thanks Stem, Im working away at the moment so have made the asusmption that the diagram i have in the manual is correct. In the isntance that it isn't and the board represents the one you posted what would the wiring look like for this? Thanks again for your help!

Hi Stem, Thanks for your assistance. Which EcoTec model do you have, underneath the boiler it states EcoTech Pro 28 R1 (presumably revision 1?). There is a timer module built into the boiler already as a control panel to the boiler, not as an external unit. There are several wiring diagrams...

Hi folks, Need a bit of a sense check for a hive installation. We currently have a Vaillant EcoTech Pro 28 with no thermostat fitted and thought we'd go down the 'smart thermostat' route via Hive (I get a decent discount on them). That said I just want to make sure that I have got it right in...