Search results

I have a potterton suprima 40 and the pcb is the same. it has a newer pcb fitted and worked perfect which is not needed now. you can have the pcb for £10+p&p. or the whole boiler for £20 i just need the space. A refurb is the reason for the boiler being not needed and i guarantee it. I am...

problem was left hand wheel bearing and left/right hand cv joints total cost £489. ouch!

it cost 400 for the sleepers as they are new/untreated. 200 for plants. 200 for the pergola. 500 for the pump etc. I layered the sleepers on some dpm straight on the ground as i have a good soil sub base. there are threaded steel rods holding the sleepers together with some steel strapping...

i can also suggest ebay i brought one for £69 from Here fast delivery and good quality.

look Here i built mine using sleepers and a liner.

i do not have one. any ideas on where to buy supporting rods?

the kitchen is about 4x4 metres with a toilet block about 1.2x1 metre. fixed from floor to roof in one corner would this support the roof enough?.

he has not put in a steel. what else can we do?.

i am having a vaulted ceiling in my kitchen and the builder says i need to have cross beams to make a triangle of the roof structure. my problem is that i do not want any beams going across the room and only wanted a ceiling like this /\ not A . if i have no choice then i have seen on...

i use svp and have no problems with the Datawrite Printable (52x) 80 Minute CDR (code 1065) at 10.99 per 100. go for printable even if you use labels as they stop the glue from destroying data. for dvd's use Ritek Inkjet Printable (8x) DVD-R (code 3192) 9.99 for 50 use roxio or nero and...

i have a loud rumbling noise (driving me mad) from my peugeot 406(R). the noise stops whe i turn left and gets louder when i speed up. it has passed a mot and there is no play in the wheel bearings could they still be worn?. the garage suspects this but does not know which side to change...

i have removed a fully working potterton suprema 40 with a flue for flat roof also a standard flue. it has all the timers and controls/pump etc. the pcb was changed for one with the longer buttons. any good to anyone or should i just skip it?. no money wanted.

70-80mm celotex,kingspan will be the best option. also fill the gaps of the boards with some flexable sealant.

thanks tlc were around the corner and i collected.

i need about 20 fire rated spotlights/downlights in chrome but can not source them. does anyone know where in north london or on the web to get them from?. they must be fire rated to comply with the building regs. thanks

thanks will phone them tomorrow.

i am getting my house referbished with a new extension. builders are due in 3 weeks. the house is being rewired with a new board. i have been prepairing the house, removing plaster etc. i have found that the wall that the electic meter is on is made from old block work which is crumbly...

thanks for the replys. conduit it is then.

what would i use to protect ariel/cat5 cables that have to be rendered/plastered over. they are on bare brick/block. I have seen some cable covers in srewfix that are like a u channel with wings that you can cover elctrical cables with. are they ok for ariel/cat5 cables?. and how do you...

thanks yes i have used a seperate earth that is in the cable. sorry i meant the fusebox connection not the meter. have used a tester on the cable and all is well and used a rcd breaker and that works ok too. thanks again