Search results

  1. A

    Removing teleswitch

    Will contact the distribution network supplier on Monday, is this something they would likely charge for to get it removed?
  2. A

    Removing teleswitch

    Its a gas combi boiler and central heating No gas fire In light of this as we are moving away from the current supplier can the electrician remove it or is it a must that it needs to be done by the distribution network supplier?
  3. A

    Removing teleswitch

    We've just moved into the property, their is an existing gas supply Our current supplier is shell energy which we will be moving away from to a new supplier
  4. A

    Removing teleswitch

    The electrician suggested to remove it, he needs the access and space to fit an isolator switch
  5. IMG_20191019_121152

    IMG_20191019_121152

    • ash1212002
    • Media item
    • Comments: 0
    • Album: Ash
  6. A

    Removing teleswitch

    Can the electrician remove a radio teleswitch or does this need to be done by the supplier? Pic below https://www.diynot.com/diy/media/img_20191019_121152.103421/
  7. A

    Fireplace opening render mix

    Need to render the fireplace opening before i have a wood burning stove installed Will a 3:1 building sand and cement with a bit if feb mix be ok?
  8. A

    New consumer unit

    It will be the latter, how can I ensure/validate that the electrician does notify BC?
  9. A

    New consumer unit

    Looking to upgrade our consumer unit, I understand building control need to be notified. The electrician has advised he will provide me a certificate which i can then provide to BC. Is this correct? Is that all I'll need from the electrician? Is there anything that the electrician needs to do...
  10. A

    New electric shower cabling

    Is the breaker fine? Should it be 40/45amps instead of 50?
  11. A

    New electric shower cabling

    Is it safe to run a 10.8kw electric shower on 10mm twin and earth with a 50 amp mcb breaker?
  12. A

    Meter tails

    Upgrading the fuse was carried out FOC, it was requested as further lights are to be installed in the property So 80amp fuse on 16mm tails is fine?
  13. A

    Meter tails

    Western power upgraded the fuse from 60amps to 80amps Should they have upgraded the tails to 20mm?
  14. A

    Ideal vogue poor hot water supply

    Fingers crossed, will report back... Thanks
  15. A

    Ideal vogue poor hot water supply

    The plumber will be around tomorrow, so will instruct him to change it to full bore So any hot water pipes that are 22mm should all be changed to 15mm? Will that improve the hot water flow rate to the bath and basin taps?
  16. A

    Ideal vogue poor hot water supply

    It looks like a reduced bore isolation valve The basin taps are 15mm Looking under the bath, the hot pipe is 22mm but reduces down to 15mm to the bath tap
  17. A

    Ideal vogue poor hot water supply

    We've just had an ideal vogue c40 combi fitted which has a hot water flow rate of 16.4L per min Prior to fitting the boiler the cold water flow rate was measured at 18 litres per min Looking at the digital readout the boiler is showing that the dhw flow rate is approx 12 litres per min when...
  18. A

    New suspended floor garage conversion

    Bump, can anyone advise if there should be a clear void/gap to ventilate the floors? i.e should the joists sit above the cavity sleeve vents?
  19. A

    Replacing mains stopcock

    My local plumbing store doesn't sell 22 to 15mm brass stopcock I found this on screwfix will this work instead, its the exact size 20mm https://www.screwfix.com/p/poly-stop-cock-20mm-x-15mm/98486
  20. A

    Replacing mains stopcock

    Cheers all, will pop down to the plumbers merchant tomorrow and purchase a 22mm to 15mm brass stopcock and fit a 3/4" olive on the 20mm black pipe ;)
Back
Top