Search results

hi rocks no it doesent fill no water at all just the pump runs for a few mins before all the light starts flashing ,i did check and clean the ball and all the gaiters around the pump also blew and sucked to out left pipe :? which was clear and drums perfect ,im sitting here kicking myself now as...

oh :shock: thought id try it anyhow as its a 40 mile trip to his house ,in reguards to a blockage ive check every thing pump removed and all gaters checked and clean also outlet pipe clear ,could the inlet valve be faulty as i know he has a brand new one somewhere as his cracked before and i...

Having a right week this week just replaced a new pump on my sisters hotpoint wm when as i was leaving had call from father in law saying his hotpoint wont open and all of lights flashing :cry: ,done a search on here first and found a thread reguarding a capasitor on here so orderd them and...

hi rocks no no noise at all ,ill check the pump tomorrow on a meter to conferm but to be honest the winding did look a bit melted but no burnt smell which was confusing

Hi there my sister has a problem with her washer it wont drain ,ive checked it and the pump isnt working and after running though cycle it stop and flashes f5 error. Ive stripped the pump down and checked for blockage but none found also impeller is free .Im pritty sure the pumps at fault but...

hi there im going to re seal my pattern imprint driveway tomorrow as i have enough sealer to do it again ,now question is can they be recolured again as the drives faded and has some chips in it again ,is this done by adding some sort of dye to the sealer

hi there my sister has a gas fire with radiants which have considerable soot on them ,she had the fire serviced last week but wishes to clean up the radiants as there a bit of an eye saw any tips at all ,ive blasted them with a compressor which removed some but not all

hi there my sister has a gas fire with radiants which have considerable soot on them ,she had the fire serviced last week but wishes to clean up the radiants as there a bit of an eye saw any tips at all ,ive blasted them with a compressor which removed some but not all

hi guys my dads just brought a static and has a gap in the kitchen for a twin applience size is 900mm .i seen a fridge freezer before which would fit but i cant seem to find it any ideas which maunfacture does these many thanks in advance

hi there just coming to the end of fitting our kitchen and need to fit the door to this fridge which was brought second have ,it came with 2 plastic and mental conector which somehow fix to the door ,does or has any one fitted a kitchen door to thid model as i dont have he manual and im...

hi guys im going to be fitting our new kitchen wall unit tommorrow and also a cooker hood which ive never mounted before ,i have place a hole ready to vent outside and it is level with the top of the units and i will be using 100x50 ducting resting on the units ,now do you usually mount the...

hi guys ,04 alhambra window not going up or down has power and can hear motor trying to go any ideas cheers

hi guys net back on so at home now , couple of replys,yes the rcd resets with the power off ,and the meter i have is just a basic digial one but ill be honest i only use it for continuaty testing and for voltage never understund the ohms thing ive managed to move a mcb from the protected side...

cheers guys ill remove the neutrals from the protected side and see if it trips hopefully i can get some pics up when i get home many thanks again for you help so far tim

hi chaps thanks for the replys will try and upload some pics later when the net is back on in our house dam vm , i havent done any testing on the circuits as my meters not to good but will try and get a sparky i know round asap ,i was just thinking it was a faulty rcd as i mentioned i can...

hi guys ive just fitted a spilt load wirlex cu to replace and old cu the problem i have is the 80amp rcd is tripping constantly and wont even reset even when the protected mcbs are all off , ive even removed all wire to the mcbs on the protected side just leaving the rcd live and it still trips...

hi its to sit ontop off the worktop and looking for a single bowl

im after a sink m8 not dinner :roll:

hi guys what sink would you recommend me for our new kitchen it will be black worktop and cream tiled floor ,i was going for the astracast rok single sink in black but after doing some searches on here they seem not to clever ,i would have stainless but dont want a thin one if you no what i mean...

hi guys im about to start fastening our kitchen units to the wall and the wall constuction is dabbed board onto thermailte 100mm block ,what fixing would you recomend to take the weight of the wall units many thanks tim