Search results

Cheers guys, Unfortunately i dont know if it ever worked properly as it fitted 2 owners ago. Although everything was installed by the same installer so im guessing it should have all been compatible. Given that the transmitter was able to communicate a (valid) low battery and tamper alert...

Sorry all faults that i can see are from the PIR/Transmitter side. The tampers for the wired zones (1-4) appear to be set up as a global tamper and alarm will set as normal with the wireless zone switched off. However the tamper alert that is showing (Garage T!) ((set as zone 091- wireless))...

This is the wireless transmitter that is wired into the PIR sensor http://www.riscogroup.co.uk/Products.aspx?proid=214 And this is the 8ch wireless reciever wired into the 595 panel...

Hello Trying to get my IP camera system up and running not sure what recording option to go for. Im using 2x 2.0Mp Planet HM132 cameras. Planning on 5-6 cameras eventually. I havent yet installed their software but i have the network setup internally and i can view/edit the cameras...

Thanks for the info guys, I can open all sensors, the panel and wireless module without ill effect other it triggers a tamper alert. I have engineer code and reset the panel to default and set up new master code. From what I can see, the wireless receiver module (gardtec wireless receiver)...

Just got my IP cameras delivered last night. I went for these because of the PoE capability so i wouldnt need massive holes and superior resolution. However, the camera has a fly lead with all the connections on it meaning that i still have to drill a 10p sized hole to fit the fly lead...

Hello I have a Gardtec 595 alarm system with a wireless module attached. There is a pir sensor in an outbuilding that is wired into a wireless transmitter. I can't find any documentation on how to set up or program the wireless section. The house was vacant with power off for best part...

Yep, looks like the room stat is gone. Programmer gives out 230v to the stat when CH is switched on. However the switch output (yellow) from the stat does not go live. Tried turning the stat still nothing. Got the heat going by keeping the valve open. Plumber coming tomorrow so...

Thats great thanks, Yep, the pump runs and boiler fires up with the valve locked open. Reckon it's a straight forward fix? Thanks

Hi guys, Gf's house has just lost the heating. Its rented and the plumber cant get out until monday evening. Had a look at it myself, Programmer is an analog Switchmaster SM850, it has options for hot water on/off/timer and heat on/off/timer. Hot water on/timer fires the boiler and...

Just posting the one that i had found see if it was any use Any other 4ch+ DVRs around the £200 mark worth considering? Unfortunately the budget is pretty tight around, having to replace the plant and extra security was unforseen! lol. Any off the shelf complete kits worth a look...

Thats great thanks, hadnt considered low light cameras, will have a look at them This is the DVR i was looking at http://www.ebay.co.uk/itm/181008118229 Seems to support D1 for both play back and encoding however i have noticed that is says "Video Standard PAL 620lines" does this mean a...

Hi guys, Rennovating an old bungalow and we were broken into losing some borrowed expensive demolition/construction equipment! Now looking to invest in some sort of CCTV system (alarm being comissioned today) as i know they will be back as the project progresses and things start going in...

I might give that a go thanks :D

Very true, i will ask that they will reset the alam to default, as ive found a wireless receiver is fitted too but i cant find any wireless sensors. I dont want to have to pay for a wireless (or wired) sensor to be installed and activated if im capable of doing it myself. Hopefully they...

Im guessing the engineer code is set by the installer to stop owners fiddling with the settings? Managed to get through to installers and have them coming out to look tomorrow :mrgreen:

Yep im pretty sure the fuse will fire up the panel, Found an installers manual with default codes etc but i dont want to try and get it going without being able to stop it if it goes off lol. Have been trying the number on the bell box since friday and although its ringing, theres no answer...

Hello We bought a house a few months ago and it has gardtec 800 alarm system. No codes or anything, the key panel has no power to it but looking at the wiring center a fuse has been removed. We have been renovating and the house was broken into a couple of days ago and all our tools...

Hello In the process of renovation and we are replacing the existing floors with concrete and underfloor heating. As we are replacing the floors, all the existing pipe work has been removed. We are at the stage now of filling and compacting the floors ready for concrete but are...