Search results

Is Sika Stixal a suitable grab adhesive to do paneling on the wall with mdf?

Do they do a petrol auger with a clutch. Nearly ripped my arms off today on the one I got.

I have a tall oak post that holds a village sign on. It needs a coat of preserve ideally with some colour(oak). What is a good quality one to use?

Would this fit a polytank in the loft as a replacement?

Just wondering what this is on the overflow pipe?

If the mains to Megaflo is isolated, is it OK to cut pipe here to fit valves for water softener no water will come back up pipe?

Have a concealed shower in one ensuites where after initially running warm it goes cold. Have replaced the thermostatic valve cartridge but issue remains. System is a Megaflo, other showers in house seem OK. Any thoughts where to look next?

Does anyone have any idea what make this is or where I could get one from?

I want to test the continuity of cable from boiler downstairs to the cupboard upstairs, what is the best way to do that?

I was wondering if someone could guide me through adding the selfmon to HA. I have the selfmon VKP on phone, is it one of these I need to configure?

I have a house of myson trv, tried to swop with a Drayton but thread seems different, is that right, wanted to fit some Tado ones but now concerned they won't fit?

I had an electrician run some armoured cable from an outside metal consumer unit to an eV charger. At the consumer unit the cable just enters through a hole, no gland or fixing. Is this acceptable?

I have the Honeywell Galaxy 2-44 ADT alarm system in house I bought, under no contract with ADT. Firstly what door sensors are they as one appears to be broken on mine and giving tamper fault. The other question, the two remaining errors are the number to dial and ARC comms fail, I am assuming...

I am trying to connect wintex via PC com, i have com 1 set to nothing fitted, connecting my USB cable to com 1 on board, set PC com to correct port, in my case com 4, but it just refuses to connect. I have reset system as removed battery and the IP com unit, now need to send the data back to set...

Looking at moving house, how do i register app with new owner? what else do I need to do to hand over to new owner?

Would a Creocote used on new shiplap be better than using say a cuprinol ducksback paint?

I have built a new pc, using an MSI MPG Z390 GAMING EDGE AC motherboard. I want to add a graphics card with 3 monitor support used mainly for videos not gaming. Looking at "MSI Radeon RX 570 ARMOR 8GB OC GDDR5 Graphics Card" Just wondering if anyone else had experience in graphics card and...

I have windows 10 pro running on a 1Gb SSD in my current pc. Can i transfer that HDD to my new PC then transfer the windows licence?

I have a symbol on top right corner with an A in a circle and a diagonal line through it, any ideas what that might be?

I have a ricochet door contact that says in Supervision Fault, how do i reset this after solving the issue i had (Loose sensor not making contact) ? Will I have to put the control panel into a "Commission Mode" and set up every contact sensor again or maybe in wintex just delete the zone #10 (...