Search results

Sadly not and that's my dilemma, Gonna try to buy some tomorrow hopefully an buy a place that sells by the metre, failing that I see fleabag sells it so will just have to wait for delivery I suppose

Might risk solder joints, getting better all the time and practise makes perfect... I hope!

Thanks will try to source some tomorrow, Is it fairly easy to use? Ive just started soldering so it's a bit dodgy, would I be better off buying a few compression fittings? Cheers

Maybe I should but screwfix sell the 8mm Microbore in 25m lengths, Is there anywhere I can buy some cheap, only need about 1m worth

ok, so working on the downstairs cloakroom turned into bit of a mare, have 8mm microbore pipe for the central heating and need to convert to 15mm to fit a towel rad im planning to put up (or trying to!) the problem is shown in the photos. i have brought some solder ring fittings with some...

Yeah helps alot, got a bNq near by and I think also seen the Dunlop stuff in selco so will prob use that cheers

Nice one, have access to most the usual stores, selco, bNq, homebase etc, cayou recommend the best value for money I.e cheapest from there. Had a look at that bal stuff in tops tiles seems alot of money for a small area Cheers

Ok gonna go for the hardibacker, screwed down. Take it I use same tile flexi adhesive underneath backer board? Hopefully that should be ok, cheers for the advice

As tpt said its a small cloakroom so shall I just get some rapid set adhesive and go for it Would save me a load of time and money if I can tile straight on. Would you recommend any type of tile as well I.e ceramic or porcelain over a natural stone which I would imagine more likely to crack

Ha love the nov 5th joke, this is the first modern house I've lived in and it's chipboard and plasterboard everywhere! Could I get away with 12mm ply, and what do I need to do to the surface so I can tile onto it? Is that hardibacker stuff no good then, as that's only 6mm thick Cheers

Ok I appreciate that this question has been as,ed alot of times before but there's so much conflicting answers I simply want to tile onto a chipboard floor, which will be heavily screwed. It's only about 2m2, do I really have to overboard? If so is hardboard the best bet or ply, and if...

Hi there Just picked up a cheap concealed cistern that originally came from bathstore. It has a 44mm flush pipe with a finned seal that goes into the hole in the back to wall pan My question is, can I buy any back to wall pan off fleabay I.e. are the flush hole inlets on pans standard sizes...

Apologies for writing and replying to my own post but finally got the downstairs rads to work, It appears it's just air. I let the system run for 15 mins, wait for a gurgle hear and there, bleed e rads. And repeat The system seems to be coming back to life just Think its air that's...

Ok, been playing about with it for a day or not really got anywhere The hot water works perfectly, However, several of the downstairs rads are cold When I turn most of them off to try and force the cold ones to heat up the boiler goes on for about a minute then shuts down Can anyone...

Update It seems to be running better now, maybe there was just a lack of water in the system as I got a bit more air out the upstairs rads, Will let it run for a bit and bleed some more Still a few gurgling noises from boiler

Sorry boilerman me again After them disappointed of the penalty shoot I've put on the boiler and after about 1 minute it stops again, the cb triped once Would this mean there air in there as after it stops there are gurgling noises I have bled the rads, pumps etc