Search results

hi. forgot to do that check, just done it and i am not getting 230v with the power and button on, i did check the mains cable to the unit and that is showing 230.

hello. i have now replaced the solenoid assembly with a new one and checked t.c.o with a multimeter and that is ok, but the shower still does not work. the neon light still comes on when i turn the power on but no water. anything else i should check or scrap the shower? cheers

thank you very much, i will check in the weekend and post back. cheers

can get hold of a multimeter, what should i be checking for?

it has 2 dials and button

hi. sorry, my mistake. there is a power light on the top of the unit and it does light up when i put the power on with the pullcord. also, just to confirm it is a t80si. cheers

hi. there is no led light built into this unit, it only has a large button to turn on and off. cheers

hello all. my triton t80si shower stopped working, the pull cord switch red button is on, so there is power but when i press the on button on the shower unit, nothing happens and there is no noise or water coming out. any advice will be great before i look at replacing it. cheers

hello all. i have a 2 year old hotpoint quadrio fridge/freezer. i turned the fridge off and unplugged it in order to get to the area behind. after about half hour i plugged it back on and it will not start, the green light does not illuminate, the fuse is good. i followed the re-start...

thanks stuart, i thought i might have to leave it for a month.

just another quick question. how long should i leave the foundation to dry before i can start building on it? cheers

almost made my heart stop :shock: thanks for that mate, i didn't fancy doing more digging as my garden has a massive mount of earth on one side and bricks on the other. missus is not happy at the mo lol. i am thinking of getting mixamate in to do the screed with they're combined screed...

hello guys. i have had my trench fill footings filled this morning for my cons but i have a slight concern regarding the slump used. as they were pumping the concrete from the volumetric truck it seemed a bit wet to me so i quieried it with the concrete guy, he said it had to be that wet to be...

it is a oak tree at the bottom corner of the garden. thanks mate :D

that makes sense mate but i was going to 1m due to trees about 16 meters away. cheers

hello all. just dug the trench for footings and hit the water table at 700mm deep on clay soil! i need to go 1m deep and don't know what to do? it is for a cons/ext which will be exempt from build regs. thanks in advance

sorted now. it was an airlock. the one vent i missed was the one under the floorboards, did that and all others for a number of times and it is working, got heat and water. wife is happy :wink: thank you guys for your help. cheers

thanks for that mate. i have now put a new pump in, traced the flow pipe from boiler to pump and found an elbow on the pipe which has a vent hole. i pumped air through this and it came out ok from drain holes on the boiler and under the pump. so that pipe is not blocked ? i have again...

silly question guys. can the 2way motorized valve stop water circulating on both the hot water and central heating at the same time? i still can't seem to get the water out of boiler through the pump and out? is there a way i can test the pipe for a blockage without cutting the pipe...

the pipes come out of top. did as you suggested but still no luck! it seems the pump is unable to pull the water from the boiler? cheers